lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 4.19 099/243] usb: dwc3: debugfs: Properly print/set link state for HS
Date
Hi,

Pavel Machek wrote:
> Hi!
>
>> From: Thinh Nguyen <thinh.nguyen@synopsys.com>
>>
>> [ Upstream commit 0d36dede457873404becd7c9cb9d0f2bcfd0dcd9 ]
>>
>> Highspeed device and below has different state names than superspeed and
>> higher. Add proper checks and printouts of link states for highspeed and
>> below.
> Just noticed some more oddity:
>> + case DWC3_LINK_STATE_RESUME:
>> + return "Resume";
>> + default:
>> + return "UNKNOWN link state\n";
>> + }
> "UNKNOWN" would be consistent with the rest of the file.

Leaving the "link state" there may be fine for now due to the way it's
printed in the log making it clearer.

>
>> +++ b/drivers/usb/dwc3/debugfs.c
>> @@ -433,13 +433,17 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)
>> unsigned long flags;
>> enum dwc3_link_state state;
>> u32 reg;
>> + u8 speed;
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> reg = dwc3_readl(dwc->regs, DWC3_DSTS);
>> state = DWC3_DSTS_USBLNKST(reg);
>> - spin_unlock_irqrestore(&dwc->lock, flags);
>> + speed = reg & DWC3_DSTS_CONNECTSPD;
>>
>> - seq_printf(s, "%s\n", dwc3_gadget_link_string(state));
>> + seq_printf(s, "%s\n", (speed >= DWC3_DSTS_SUPERSPEED) ?
>> + dwc3_gadget_link_string(state) :
>> + dwc3_gadget_hs_link_string(state));
>> + spin_unlock_irqrestore(&dwc->lock, flags);
>>
>> return 0;
>> }
> The locking change is really wrong, right? There's no reason to do
> seq_printfs under spinlock..

Yes, it can be unlocked earlier.

>
>> @@ -477,6 +483,15 @@ static ssize_t dwc3_link_state_write(struct
> file *file,
>> return -EINVAL;
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> + reg = dwc3_readl(dwc->regs, DWC3_DSTS);
>> + speed = reg & DWC3_DSTS_CONNECTSPD;
>> +
>> + if (speed < DWC3_DSTS_SUPERSPEED &&
>> + state != DWC3_LINK_STATE_RECOV) {
>> + spin_unlock_irqrestore(&dwc->lock, flags);
>> + return -EINVAL;
>> + }
>> +
>> dwc3_gadget_set_link_state(dwc, state);
>> spin_unlock_irqrestore(&dwc->lock, flags);
>>
> This might be ok but is not mentioned in the changelog.
>

I'll spell it out next time when I mention "add proper checks" in the
commit message as it obviously wasn't clear.

Thanks,
Thinh

\
 
 \ /
  Last update: 2019-12-13 20:36    [W:0.178 / U:2.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site