lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/10] PCMCIA/i82092: use dev_<level> instead of printk
Date
Improve the log output by using the
device-aware dev_err()/dev_info() functions. While at it, update one
remaining printk(KERN_ERR ...) call to the preferred pr_err() call
and delete commented out debugging lines.

Co-developed-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Simon Geis <simon.geis@fau.de>

---
drivers/pcmcia/i82092.c | 67 ++++++++++++++++++++++++-----------------
1 file changed, 39 insertions(+), 28 deletions(-)

diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index aad8a46605be..0afcdc69c103 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -92,11 +92,13 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
break;

default:
- printk(KERN_ERR "i82092aa: Oops, you did something we didn't think of.\n");
+ dev_err(&dev->dev,
+ "Oops, you did something we didn't think of.\n");
ret = -EIO;
goto err_out_disable;
}
- printk(KERN_INFO "i82092aa: configured as a %d socket device.\n", socket_count);
+ dev_info(&dev->dev, "configured as a %d socket device.\n",
+ socket_count);

if (!request_region(pci_resource_start(dev, 0), 2, "i82092aa")) {
ret = -EBUSY;
@@ -117,9 +119,9 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i

if (card_present(i)) {
sockets[i].card_state = 3;
- dev_dbg(&dev->dev, "i82092aa: slot %i is occupied\n", i);
+ dev_dbg(&dev->dev, "slot %i is occupied\n", i);
} else {
- dev_dbg(&dev->dev, "i82092aa: slot %i is vacant\n", i);
+ dev_dbg(&dev->dev, "slot %i is vacant\n", i);
}
}

@@ -130,7 +132,8 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
/* Register the interrupt handler */
dev_dbg(&dev->dev, "Requesting interrupt %i\n", dev->irq);
if ((ret = request_irq(dev->irq, i82092aa_interrupt, IRQF_SHARED, "i82092aa", i82092aa_interrupt))) {
- printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq);
+ dev_err(&dev->dev, "Failed to register IRQ %d, aborting\n",
+ dev->irq);
goto err_out_free_res;
}

@@ -306,7 +309,7 @@ static irqreturn_t i82092aa_interrupt(int irq, void *dev)
while (1) {
loopcount++;
if (loopcount>20) {
- printk(KERN_ERR "i82092aa: infinite eventloop in interrupt \n");
+ pr_err("i82092aa: infinite eventloop in interrupt\n");
break;
}

@@ -326,7 +329,8 @@ static irqreturn_t i82092aa_interrupt(int irq, void *dev)

if (csc & I365_CSC_DETECT) {
events |= SS_DETECT;
- printk("Card detected in socket %i!\n",i);
+ dev_info(&sockets[i].dev->dev,
+ "Card detected in socket %i!\n", i);
}

if (indirect_read(i,I365_INTCTL) & I365_PC_IOCARD) {
@@ -417,7 +421,9 @@ static int i82092aa_init(struct pcmcia_socket *sock)

static int i82092aa_get_status(struct pcmcia_socket *socket, u_int *value)
{
- unsigned int sock = container_of(socket, struct socket_info, socket)->number;
+ struct socket_info *sock_info = container_of(socket, struct socket_info,
+ socket);
+ unsigned int sock = sock_info->number;
unsigned int status;

enter("i82092aa_get_status");
@@ -458,7 +464,9 @@ static int i82092aa_get_status(struct pcmcia_socket *socket, u_int *value)

static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *state)
{
- unsigned int sock = container_of(socket, struct socket_info, socket)->number;
+ struct socket_info *sock_info = container_of(socket, struct socket_info,
+ socket);
+ unsigned int sock = sock_info->number;
unsigned char reg;

enter("i82092aa_set_socket");
@@ -482,11 +490,11 @@ static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *sta
reg = I365_PWR_NORESET; /* default: disable resetdrv on resume */

if (state->flags & SS_PWR_AUTO) {
- printk("Auto power\n");
+ dev_info(&sock_info->dev->dev, "Auto power\n");
reg |= I365_PWR_AUTO; /* automatic power mngmnt */
}
if (state->flags & SS_OUTPUT_ENA) {
- printk("Power Enabled \n");
+ dev_info(&sock_info->dev->dev, "Power Enabled\n");
reg |= I365_PWR_OUT; /* enable power */
}

@@ -494,11 +502,15 @@ static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *sta
case 0:
break;
case 50:
- printk("setting voltage to Vcc to 5V on socket %i\n",sock);
+ dev_info(&sock_info->dev->dev,
+ "setting voltage to Vcc to 5V on socket %i\n",
+ sock);
reg |= I365_VCC_5V;
break;
default:
- printk("i82092aa: i82092aa_set_socket called with invalid VCC power value: %i ", state->Vcc);
+ dev_err(&sock_info->dev->dev,
+ "%s called with invalid VCC power value: %i",
+ __func__, state->Vcc);
leave("i82092aa_set_socket");
return -EINVAL;
}
@@ -506,18 +518,22 @@ static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *sta

switch (state->Vpp) {
case 0:
- printk("not setting Vpp on socket %i\n",sock);
+ dev_info(&sock_info->dev->dev,
+ "not setting Vpp on socket %i\n", sock);
break;
case 50:
- printk("setting Vpp to 5.0 for socket %i\n",sock);
+ dev_info(&sock_info->dev->dev,
+ "setting Vpp to 5.0 for socket %i\n", sock);
reg |= I365_VPP1_5V | I365_VPP2_5V;
break;
case 120:
- printk("setting Vpp to 12.0\n");
+ dev_info(&sock_info->dev->dev, "setting Vpp to 12.0\n");
reg |= I365_VPP1_12V | I365_VPP2_12V;
break;
default:
- printk("i82092aa: i82092aa_set_socket called with invalid VPP power value: %i ", state->Vcc);
+ dev_err(&sock_info->dev->dev,
+ "%s called with invalid VPP power value: %i",
+ __func__, state->Vcc);
leave("i82092aa_set_socket");
return -EINVAL;
}
@@ -555,7 +571,9 @@ static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *sta

static int i82092aa_set_io_map(struct pcmcia_socket *socket, struct pccard_io_map *io)
{
- unsigned int sock = container_of(socket, struct socket_info, socket)->number;
+ struct socket_info *sock_info = container_of(socket, struct socket_info,
+ socket);
+ unsigned int sock = sock_info->number;
unsigned char map, ioctl;

enter("i82092aa_set_io_map");
@@ -576,8 +594,6 @@ static int i82092aa_set_io_map(struct pcmcia_socket *socket, struct pccard_io_ma
if (indirect_read(sock, I365_ADDRWIN) & I365_ENA_IO(map))
indirect_resetbit(sock, I365_ADDRWIN, I365_ENA_IO(map));

-/* printk("set_io_map: Setting range to %x - %x \n",io->start,io->stop); */
-
/* write the new values */
indirect_write16(sock,I365_IO(map)+I365_W_START,io->start);
indirect_write16(sock,I365_IO(map)+I365_W_STOP,io->stop);
@@ -619,7 +635,8 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
if ( (mem->card_start > 0x3ffffff) || (region.start > region.end) ||
(mem->speed > 1000) ) {
leave("i82092aa_set_mem_map: invalid address / speed");
- printk("invalid mem map for socket %i: %llx to %llx with a "
+ dev_err(&sock_info->dev->dev,
+ "invalid mem map for socket %i: %llx to %llx with a "
"start of %x\n",
sock,
(unsigned long long)region.start,
@@ -633,8 +650,6 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
indirect_resetbit(sock, I365_ADDRWIN, I365_ENA_MEM(map));


-/* printk("set_mem_map: Setting map %i range to %x - %x on socket %i, speed is %i, active = %i \n",map, region.start,region.end,sock,mem->speed,mem->flags & MAP_ACTIVE); */
-
/* write the start address */
base = I365_MEM(map);
i = (region.start >> 12) & 0x0fff;
@@ -668,12 +683,8 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
i = ((mem->card_start - region.start) >> 12) & 0x3fff;
if (mem->flags & MAP_WRPROT)
i |= I365_MEM_WRPROT;
- if (mem->flags & MAP_ATTRIB) {
-/* printk("requesting attribute memory for socket %i\n",sock);*/
+ if (mem->flags & MAP_ATTRIB)
i |= I365_MEM_REG;
- } else {
-/* printk("requesting normal memory for socket %i\n",sock);*/
- }
indirect_write16(sock,base+I365_W_OFF,i);

/* Enable the window if necessary */
--
2.20.1
\
 
 \ /
  Last update: 2019-12-13 14:55    [W:0.096 / U:10.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site