[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/2] Add support to handle ZRX-DC Compliant PHYs
According the PCI Express base specification when PHY does not meet
ZRX-DC specification, after every 100ms timeout the link should
transition to recovery state when the link is in low power states.

Ports that meet the ZRX-DC specification for 2.5 GT/s while in the
L1.Idle state and are therefore not required to implement the 100 ms
timeout and transition to Recovery should avoid implementing it, since
it will reduce the power savings expected from the L1 state.

DesignWare controller provides GEN3_ZRXDC_NONCOMPL field in
GEN3_RELATED_OFF to specify about ZRX-DC compliant PHY.

We need to get the PHY property in controller driver. So, we are
proposing a new method phy_property_present() in the phy driver.

PCIe controller platform drivers should populate the phy_zrxdc_compliant
flag, which will be used by generic DesignWare driver.

pci->phy_zrxdc_compliant = phy_property_present(xxxx_ctrl->phy, "phy-zrxdc-compliant");

Patchset v2 can be found at:
- 1/2:
- 2/2:

Changes w.r.t v2:
- Addressed review comments
- Rebased on latest linus/master

Changes w.r.t v3:
- Added as pointed by Gustavo, Sorry for annoying.

Changes w.r.t v4:
- Addressed review comments from Andrew Murray
- Rebased on latest linus/master

Anvesh Salveru (2):
phy: core: add phy_property_present method
PCI: dwc: add support to handle ZRX-DC Compliant PHYs

drivers/pci/controller/dwc/pcie-designware.c | 6 ++++++
drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
drivers/phy/phy-core.c | 17 +++++++++++++++++
include/linux/phy/phy.h | 6 ++++++
4 files changed, 33 insertions(+)


 \ /
  Last update: 2019-12-13 13:48    [W:0.056 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site