lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] iommu/vt-d: Fix dmar pte read access not set error
From
Date
Hi,

On 12/13/19 11:16 AM, Jerry Snitselaar wrote:
> On Thu Dec 12 19, Jerry Snitselaar wrote:
>> On Fri Dec 13 19, Lu Baolu wrote:
>>> Hi,
>>>
>>> On 12/13/19 8:30 AM, Jerry Snitselaar wrote:
>>>> On Thu Dec 12 19, Lu Baolu wrote:
>>>>> Hi,
>>>>>
>>>>> On 12/12/19 9:49 AM, Jerry Snitselaar wrote:
>>>>>> On Wed Dec 11 19, Lu Baolu wrote:
>>>>>>> If the default DMA domain of a group doesn't fit a device, it
>>>>>>> will still sit in the group but use a private identity domain.
>>>>>>> When map/unmap/iova_to_phys come through iommu API, the driver
>>>>>>> should still serve them, otherwise, other devices in the same
>>>>>>> group will be impacted. Since identity domain has been mapped
>>>>>>> with the whole available memory space and RMRRs, we don't need
>>>>>>> to worry about the impact on it.
>>>>>>>
>>>>>>> Link: https://www.spinics.net/lists/iommu/msg40416.html
>>>>>>> Cc: Jerry Snitselaar <jsnitsel@redhat.com>
>>>>>>> Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
>>>>>>> Fixes: 942067f1b6b97 ("iommu/vt-d: Identify default domains
>>>>>>> replaced with private")
>>>>>>> Cc: stable@vger.kernel.org # v5.3+
>>>>>>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>>>>>>
>>>>>> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
>>>>>
>>>>> Can you please try this fix and check whether it can fix your problem?
>>>>> If it helps, do you mind adding a Tested-by?
>>>>>
>>>>> Best regards,
>>>>> baolu
>>>>>
>>>>
>>>> I'm testing with this patch, my patch that moves the direct mapping
>>>> call,
>>>> and Alex's patch for the ISA bridge. It solved the 2 iommu mapping
>>>> errors
>>>> I was seeing with default passthrough, I no longer see all the dmar pte
>>>> read access errors, and the system boots allowing me to login. I'm
>>>> tracking
>>>> down 2 issues at the moment. With passthrough I see a problem with
>>>> 01:00.4
>>>> that I mentioned in the earlier email:
>>>>
>>>> [   78.978573] uhci_hcd: USB Universal Host Controller Interface driver
>>>> [   78.980842] uhci_hcd 0000:01:00.4: UHCI Host Controller
>>>> [   78.982738] uhci_hcd 0000:01:00.4: new USB bus registered,
>>>> assigned bus number 3
>>>> [   78.985222] uhci_hcd 0000:01:00.4: detected 8 ports
>>>> [   78.986907] uhci_hcd 0000:01:00.4: port count misdetected?
>>>> forcing to 2 ports
>>>> [   78.989316] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
>>>> [   78.994634] uhci_hcd 0000:01:00.4: DMAR: 32bit DMA uses
>>>> non-identity mapping
>>>> [   7 0000:01:00.4: unable to allocate consistent memory for frame list
>>>> [   79.499891] uhci_hcd 0000:01:00.4: startup error -16
>>>> [   79.501588] uhci_hcd 0000:01:00.4: USB bus 3 deregistered
>>>> [   79.503494] uhci_hcd 0000:01:00.4: init 0000:01:00.4 fail, -16
>>>> [   79.505497] uhci_hcd: probe of 0000:01:00.4 failed with error -16
>>>>
>>>> If I boot the system with iommu=nopt I see an iommu map failure due to
>>>> the prot check in __domain_mapping:
>>>>
>>>> [   40.940589] pci 0000:00:1f.0: iommu_group_add_device: calling
>>>> iommu_group_create_direct_mappings
>>>> [   40.943558] pci 0000:00:1f.0: iommu_group_create_direct_mappings:
>>>> iterating through mappings
>>>> [   40.946402] pci 0000:00:1f.0: iommu_group_create_direct_mappings:
>>>> calling apply_resv_region
>>>> [   40.949184] pci 0000:00:1f.0: iommu_group_create_direct_mappings:
>>>> entry type is direct
>>>> [   40.951819] DMAR: intel_iommu_map: enter
>>>> [   40.953128] DMAR: __domain_mapping: prot &
>>>> (DMA_PTE_READ|DMA_PTE_WRITE) == 0
>>>> [   40.955486] DMAR: domain_mapping: __domain_mapping failed
>>>> [   40.957348] DMAR: intel_iommu_map: domain_pfn_mapping returned -22
>>>> [   40.959466] DMAR: intel_iommu_map: leave
>>>> [   40.959468] iommu: iommu_map: ops->map failed iova 0x0 pa
>>>> 0x0000000000000000 pgsize 0x1000
>>>> [   40.963511] pci 0000:00:1f.0: iommu_group_create_direct_mappings:
>>>> iommu_map failed
>>>> [   40.966026] pci 0000:00:1f.0: iommu_group_create_direct_mappings:
>>>> leaving func
>>>> [   40.968487] pci 0000:00:1f.0: iommu_group_add_device: calling
>>>> __iommu_attach_device
>>>> [   40.971016] pci 0000:00:1f.0: Adding to iommu group 19
>>>> [   40.972731] pci 0000:00:1f.0: DMAR: domain->type is dma
>>>>
>>>> /sys/kernel/iommu_groups/19
>>>> [root@hp-dl388g8-07 19]# cat reserved_regions 0x0000000000000000
>>>> 0x0000000000ffffff direct
>>>> 0x00000000bdf6e000 0x00000000bdf84fff direct
>>>> 0x00000000fee00000 0x00000000feefffff msi
>>>>
>>>> 00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC
>>>> Controller
>>>
>>> This seems to be another issue?
>>>
>>> Best regards,
>>> baolu
>>
>> In intel_iommu_get_resv_regions this iommu_alloc_resv_region is called
>> with prot set to 0:
>>
>>                if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) {
>>                        reg = iommu_alloc_resv_region(0, 1UL << 24, 0,
>>
>> IOMMU_RESV_DIRECT_RELAXABLE);
>>                        if (reg)
>>
>
> Looking at the older code for the ISA bridge it looks like it called
> iommu_prepare_identity_map -> domain_prepare_identity_map ->
> iommu_domain_identity_map -> and finally __domain_mapping with
> DMA_PTE_READ|DMA_PTE_WRITE?

Yes. Returning a reserved region without any access permission makes no
sense. Can you please post a fix for this?

Best regards,
baolu

\
 
 \ /
  Last update: 2019-12-13 06:02    [W:0.055 / U:3.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site