lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 16/17] firmware: qcom_scm: Remove thin wrappers
Date
qcom_scm-32 and qcom_scm-64 implementations are nearly identical, so
make qcom_scm_call and qcom_scm_call_atomic unique to each and the SCM
descriptor creation common to each. There are the following catches:
- __qcom_scm_is_call_available is still in each -32,-64 implementation
as the argument is unique to each convention
- For some functions, only one implementation was provided in -32 or
-64. The actual implementation was moved into qcom_scm.c
- io_writel and io_readl in -64 were non-atomic calls and in -32 they
were. Atomic is the better option, so use it.

Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
drivers/firmware/qcom_scm-32.c | 461 +----------------------------------------
drivers/firmware/qcom_scm-64.c | 434 +-------------------------------------
drivers/firmware/qcom_scm.c | 392 ++++++++++++++++++++++++++++++++---
drivers/firmware/qcom_scm.h | 87 ++++----
4 files changed, 426 insertions(+), 948 deletions(-)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index e9b396c..08220e7 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -15,75 +15,8 @@

#include "qcom_scm.h"

-#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
-#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
-#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
-
-#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
-#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
-#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
-
-struct qcom_scm_entry {
- int flag;
- void *entry;
-};
-
-static struct qcom_scm_entry qcom_scm_wb[] = {
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
-};
-
static DEFINE_MUTEX(qcom_scm_lock);

-#define MAX_QCOM_SCM_ARGS 10
-#define MAX_QCOM_SCM_RETS 3
-
-enum qcom_scm_arg_types {
- QCOM_SCM_VAL,
- QCOM_SCM_RO,
- QCOM_SCM_RW,
- QCOM_SCM_BUFVAL,
-};
-
-#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
- (((a) & 0x3) << 4) | \
- (((b) & 0x3) << 6) | \
- (((c) & 0x3) << 8) | \
- (((d) & 0x3) << 10) | \
- (((e) & 0x3) << 12) | \
- (((f) & 0x3) << 14) | \
- (((g) & 0x3) << 16) | \
- (((h) & 0x3) << 18) | \
- (((i) & 0x3) << 20) | \
- (((j) & 0x3) << 22) | \
- ((num) & 0xf))
-
-#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
-
-/**
- * struct qcom_scm_desc
- * @arginfo: Metadata describing the arguments in args[]
- * @args: The array of arguments for the secure syscall
- */
-struct qcom_scm_desc {
- u32 svc;
- u32 cmd;
- u32 arginfo;
- u64 args[MAX_QCOM_SCM_ARGS];
- u32 owner;
-};
-
-/**
- * struct qcom_scm_res
- * @result: The values returned by the secure syscall
- */
-struct qcom_scm_res {
- u64 result[MAX_QCOM_SCM_RETS];
-};

/**
* struct arm_smccc_args
@@ -196,7 +129,7 @@ static void __scm_legacy_do(const struct arm_smccc_args *smc,
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
-static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
struct qcom_scm_res *res)
{
u8 arglen = desc->arginfo & 0xf;
@@ -285,9 +218,9 @@ static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
* This shall only be used with commands that are guaranteed to be
* uninterruptable, atomic and SMP safe.
*/
-static int qcom_scm_call_atomic(struct device *unused,
- const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int qcom_scm_call_atomic(struct device *unused,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
int context_id;
struct arm_smccc_res smc_res;
@@ -309,113 +242,6 @@ static int qcom_scm_call_atomic(struct device *unused,
return smc_res.a0;
}

-/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
- */
-int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- int flags = 0;
- int cpu;
- int scm_cb_flags[] = {
- QCOM_SCM_FLAG_COLDBOOT_CPU0,
- QCOM_SCM_FLAG_COLDBOOT_CPU1,
- QCOM_SCM_FLAG_COLDBOOT_CPU2,
- QCOM_SCM_FLAG_COLDBOOT_CPU3,
- };
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR,
- };
-
- if (!cpus || (cpus && cpumask_empty(cpus)))
- return -EINVAL;
-
- for_each_cpu(cpu, cpus) {
- if (cpu < ARRAY_SIZE(scm_cb_flags))
- flags |= scm_cb_flags[cpu];
- else
- set_cpu_present(cpu, false);
- }
-
- desc.args[0] = flags;
- desc.args[1] = virt_to_phys(entry);
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
-/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
- */
-int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- int ret;
- int flags = 0;
- int cpu;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR,
- };
-
- /*
- * Reassign only if we are switching from hotplug entry point
- * to cpuidle entry point or vice versa.
- */
- for_each_cpu(cpu, cpus) {
- if (entry == qcom_scm_wb[cpu].entry)
- continue;
- flags |= qcom_scm_wb[cpu].flag;
- }
-
- /* No change in entry function */
- if (!flags)
- return 0;
-
- desc.args[0] = flags;
- desc.args[1] = virt_to_phys(entry);
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, NULL);
- if (!ret) {
- for_each_cpu(cpu, cpus)
- qcom_scm_wb[cpu].entry = entry;
- }
-
- return ret;
-}
-
-/**
- * qcom_scm_cpu_power_down() - Power down the cpu
- * @flags - Flags to flush cache
- *
- * This is an end point to power down cpu. If there was a pending interrupt,
- * the control would return from this function, otherwise, the cpu jumps to the
- * warm boot entry point set for this cpu upon reset.
- */
-void __qcom_scm_cpu_power_down(struct device *dev, u32 flags)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
- .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
- .arginfo = QCOM_SCM_ARGS(1),
- };
-
- qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
@@ -432,285 +258,6 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
return ret ? : res.result[0];
}

-int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
- u32 req_cnt, u32 *resp)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_HDCP,
- .cmd = QCOM_SCM_HDCP_INVOKE,
- };
- struct qcom_scm_res res;
-
- if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
- return -ERANGE;
-
- desc.args[0] = req[0].addr;
- desc.args[1] = req[0].val;
- desc.args[2] = req[1].addr;
- desc.args[3] = req[1].val;
- desc.args[4] = req[2].addr;
- desc.args[5] = req[2].val;
- desc.args[6] = req[3].addr;
- desc.args[7] = req[3].val;
- desc.args[8] = req[4].addr;
- desc.args[9] = req[4].val;
- desc.arginfo = QCOM_SCM_ARGS(10);
-
- ret = qcom_scm_call(dev, &desc, &res);
- *resp = res.result[0];
-
- return ret;
-}
-
-int __qcom_scm_ocmem_lock(struct device *dev, u32 id, u32 offset, u32 size,
- u32 mode)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_OCMEM,
- .cmd = QCOM_SCM_OCMEM_LOCK_CMD,
- };
-
- desc.args[0] = id;
- desc.args[1] = offset;
- desc.args[2] = size;
- desc.args[3] = mode;
- desc.arginfo = QCOM_SCM_ARGS(4);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
-int __qcom_scm_ocmem_unlock(struct device *dev, u32 id, u32 offset, u32 size)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_OCMEM,
- .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD,
- };
-
- desc.args[0] = id;
- desc.args[1] = offset;
- desc.args[2] = size;
- desc.arginfo = QCOM_SCM_ARGS(3);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
void __qcom_scm_init(void)
{
}
-
-bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? false : !!res.result[0];
-}
-
-int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = metadata_phys;
- desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = addr;
- desc.args[2] = size;
- desc.arginfo = QCOM_SCM_ARGS(3);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = reset;
- desc.args[1] = 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
- };
-
- desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
-int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = state;
- desc.args[1] = id;
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
- size_t mem_sz, phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz)
-{
- return -ENODEV;
-}
-
-int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
- u32 spare)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = device_id;
- desc.args[1] = spare;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size)
-{
- return -ENODEV;
-}
-
-int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
- u32 spare)
-{
- return -ENODEV;
-}
-
-int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
- unsigned int *val)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_READ,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = addr;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call_atomic(dev, &desc, &res);
- if (ret >= 0)
- *val = res.result[0];
-
- return ret < 0 ? ret : 0;
-}
-
-int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_WRITE,
- };
-
- desc.args[0] = addr;
- desc.args[1] = val;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
-int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool enable)
-{
- return -ENODEV;
-}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 9507047..4defc7c 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -16,52 +16,6 @@

#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))

-#define MAX_QCOM_SCM_ARGS 10
-#define MAX_QCOM_SCM_RETS 3
-
-enum qcom_scm_arg_types {
- QCOM_SCM_VAL,
- QCOM_SCM_RO,
- QCOM_SCM_RW,
- QCOM_SCM_BUFVAL,
-};
-
-#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
- (((a) & 0x3) << 4) | \
- (((b) & 0x3) << 6) | \
- (((c) & 0x3) << 8) | \
- (((d) & 0x3) << 10) | \
- (((e) & 0x3) << 12) | \
- (((f) & 0x3) << 14) | \
- (((g) & 0x3) << 16) | \
- (((h) & 0x3) << 18) | \
- (((i) & 0x3) << 20) | \
- (((j) & 0x3) << 22) | \
- ((num) & 0xf))
-
-#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
-
-/**
- * struct qcom_scm_desc
- * @arginfo: Metadata describing the arguments in args[]
- * @args: The array of arguments for the secure syscall
- */
-struct qcom_scm_desc {
- u32 svc;
- u32 cmd;
- u32 arginfo;
- u64 args[MAX_QCOM_SCM_ARGS];
- u32 owner;
-};
-
-/**
- * struct qcom_scm_res
- * @result: The values returned by the secure syscall
- */
-struct qcom_scm_res {
- u64 result[MAX_QCOM_SCM_RETS];
-};
-
/**
* struct arm_smccc_args
* @args: The array of values used in registers in smc instruction
@@ -206,8 +160,8 @@ static int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
* Sends a command to the SCM and waits for the command to finish processing.
* This should *only* be called in pre-emptible context.
*/
-static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
might_sleep();
return __scm_smc_call(dev, desc, res, false);
@@ -224,54 +178,12 @@ static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
* Sends a command to the SCM and waits for the command to finish processing.
* This can be called in atomic context.
*/
-static int qcom_scm_call_atomic(struct device *dev,
- const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int qcom_scm_call_atomic(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
return __scm_smc_call(dev, desc, res, true);
}

-/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
- */
-int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- return -ENOTSUPP;
-}
-
-/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
- * @dev: Device pointer
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
- */
-int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- return -ENOTSUPP;
-}
-
-/**
- * qcom_scm_cpu_power_down() - Power down the cpu
- * @flags - Flags to flush cache
- *
- * This is an end point to power down cpu. If there was a pending interrupt,
- * the control would return from this function, otherwise, the cpu jumps to the
- * warm boot entry point set for this cpu upon reset.
- */
-void __qcom_scm_cpu_power_down(struct device *dev, u32 flags)
-{
-}
-
int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
@@ -291,50 +203,6 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
return ret ? : res.result[0];
}

-int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
- u32 req_cnt, u32 *resp)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_HDCP,
- .cmd = QCOM_SCM_HDCP_INVOKE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
- return -ERANGE;
-
- desc.args[0] = req[0].addr;
- desc.args[1] = req[0].val;
- desc.args[2] = req[1].addr;
- desc.args[3] = req[1].val;
- desc.args[4] = req[2].addr;
- desc.args[5] = req[2].val;
- desc.args[6] = req[3].addr;
- desc.args[7] = req[3].val;
- desc.args[8] = req[4].addr;
- desc.args[9] = req[4].val;
- desc.arginfo = QCOM_SCM_ARGS(10);
-
- ret = qcom_scm_call(dev, &desc, &res);
- *resp = res.result[0];
-
- return ret;
-}
-
-int __qcom_scm_ocmem_lock(struct device *dev, uint32_t id, uint32_t offset,
- uint32_t size, uint32_t mode)
-{
- return -ENOTSUPP;
-}
-
-int __qcom_scm_ocmem_unlock(struct device *dev, uint32_t id, uint32_t offset,
- uint32_t size)
-{
- return -ENOTSUPP;
-}
-
void __qcom_scm_init(void)
{
struct qcom_scm_desc desc = {
@@ -366,297 +234,3 @@ void __qcom_scm_init(void)
out:
pr_info("QCOM SCM SMC Convention: %lld\n", qcom_smccc_convention);
}
-
-bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? false : !!res.result[0];
-}
-
-int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = metadata_phys;
- desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = addr;
- desc.args[2] = size;
- desc.arginfo = QCOM_SCM_ARGS(3);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = reset;
- desc.args[1] = 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = state;
- desc.args[1] = id;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
- size_t mem_sz, phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_ASSIGN,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = mem_region;
- desc.args[1] = mem_sz;
- desc.args[2] = src;
- desc.args[3] = src_sz;
- desc.args[4] = dest;
- desc.args[5] = dest_sz;
- desc.args[6] = 0;
-
- desc.arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
- QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
- QCOM_SCM_VAL, QCOM_SCM_VAL);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = device_id;
- desc.args[1] = spare;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = spare;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- if (size)
- *size = res.result[0];
-
- return ret ? : res.result[1];
-}
-
-int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
- u32 spare)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- int ret;
-
- desc.args[0] = addr;
- desc.args[1] = size;
- desc.args[2] = spare;
- desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
- QCOM_SCM_VAL);
-
- ret = qcom_scm_call(dev, &desc, NULL);
-
- /* the pg table has been initialized already, ignore the error */
- if (ret == -EPERM)
- ret = 0;
-
- return ret;
-}
-
-int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
-int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
- unsigned int *val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_READ,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = addr;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
- if (ret >= 0)
- *val = res.result[0];
-
- return ret < 0 ? ret : 0;
-}
-
-int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_WRITE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = addr;
- desc.args[1] = val;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
-int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
- .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
- desc.args[1] = en;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 5ba4c85..b29e6c1 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -16,6 +16,7 @@
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/reset-controller.h>
+#include <linux/arm-smccc.h>

#include "qcom_scm.h"

@@ -49,6 +50,28 @@ struct qcom_scm_mem_map_info {
__le64 mem_size;
};

+#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
+
+struct qcom_scm_wb_entry {
+ int flag;
+ void *entry;
+};
+
+static struct qcom_scm_wb_entry qcom_scm_wb[] = {
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
static struct qcom_scm *__scm;

static int qcom_scm_clk_enable(void)
@@ -94,7 +117,39 @@ static void qcom_scm_clk_disable(void)
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
+ int ret;
+ int flags = 0;
+ int cpu;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_ADDR,
+ .arginfo = QCOM_SCM_ARGS(2),
+ };
+
+ /*
+ * Reassign only if we are switching from hotplug entry point
+ * to cpuidle entry point or vice versa.
+ */
+ for_each_cpu(cpu, cpus) {
+ if (entry == qcom_scm_wb[cpu].entry)
+ continue;
+ flags |= qcom_scm_wb[cpu].flag;
+ }
+
+ /* No change in entry function */
+ if (!flags)
+ return 0;
+
+ desc.args[0] = flags;
+ desc.args[1] = virt_to_phys(entry);
+
+ ret = qcom_scm_call(__scm->dev, &desc, NULL);
+ if (!ret) {
+ for_each_cpu(cpu, cpus)
+ qcom_scm_wb[cpu].entry = entry;
+ }
+
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);

@@ -108,8 +163,35 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
*/
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_cold_boot_addr(__scm ? __scm->dev : NULL, entry,
- cpus);
+ int flags = 0;
+ int cpu;
+ int scm_cb_flags[] = {
+ QCOM_SCM_FLAG_COLDBOOT_CPU0,
+ QCOM_SCM_FLAG_COLDBOOT_CPU1,
+ QCOM_SCM_FLAG_COLDBOOT_CPU2,
+ QCOM_SCM_FLAG_COLDBOOT_CPU3,
+ };
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_ADDR,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ if (!cpus || (cpus && cpumask_empty(cpus)))
+ return -EINVAL;
+
+ for_each_cpu(cpu, cpus) {
+ if (cpu < ARRAY_SIZE(scm_cb_flags))
+ flags |= scm_cb_flags[cpu];
+ else
+ set_cpu_present(cpu, false);
+ }
+
+ desc.args[0] = flags;
+ desc.args[1] = virt_to_phys(entry);
+
+ return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);

@@ -123,16 +205,52 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
void qcom_scm_cpu_power_down(u32 flags)
{
- __qcom_scm_cpu_power_down(__scm ? __scm->dev : NULL, flags);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
+ .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);

int qcom_scm_set_remote_state(u32 state, u32 id)
{
- return __qcom_scm_set_remote_state(__scm->dev, state, id);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = state,
+ .args[1] = id,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_set_remote_state);

+static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+
static void qcom_scm_set_download_mode(bool enable)
{
bool avail;
@@ -144,8 +262,8 @@ static void qcom_scm_set_download_mode(bool enable)
if (avail) {
ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
} else if (__scm->dload_mode_addr) {
- ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
- enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+ ret = qcom_scm_io_writel(__scm->dload_mode_addr,
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
@@ -172,6 +290,14 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
dma_addr_t mdata_phys;
void *mdata_buf;
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
+ .arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;

/*
* During the scm call memory protection will be enabled for the meta
@@ -190,14 +316,16 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
if (ret)
goto free_metadata;

- ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys);
+ desc.args[1] = mdata_phys;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);

qcom_scm_clk_disable();

free_metadata:
dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);

- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_init_image);

@@ -213,15 +341,25 @@ EXPORT_SYMBOL(qcom_scm_pas_init_image);
int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
+ .arginfo = QCOM_SCM_ARGS(3),
+ .args[0] = peripheral,
+ .args[1] = addr,
+ .args[2] = size,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;

ret = qcom_scm_clk_enable();
if (ret)
return ret;

- ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
qcom_scm_clk_disable();

- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_mem_setup);

@@ -235,15 +373,21 @@ EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
int qcom_scm_pas_auth_and_reset(u32 peripheral)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;

ret = qcom_scm_clk_enable();
if (ret)
return ret;

- ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
qcom_scm_clk_disable();

- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);

@@ -256,15 +400,24 @@ EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
int qcom_scm_pas_shutdown(u32 peripheral)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;

ret = qcom_scm_clk_enable();
if (ret)
return ret;

- ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
qcom_scm_clk_disable();

- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_shutdown);

@@ -278,16 +431,44 @@ EXPORT_SYMBOL(qcom_scm_pas_shutdown);
bool qcom_scm_pas_supported(u32 peripheral)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;

ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
QCOM_SCM_PIL_PAS_IS_SUPPORTED);
if (ret <= 0)
return false;

- return __qcom_scm_pas_supported(__scm->dev, peripheral);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? false : !!res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_supported);

+static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = reset,
+ .args[1] = 0,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? : res.result[0];
+}
+
static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
@@ -313,13 +494,38 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {

int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
{
- return __qcom_scm_io_readl(__scm->dev, addr, val);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_READ,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = addr,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+ if (ret >= 0)
+ *val = res.result[0];
+
+ return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL(qcom_scm_io_readl);

int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
{
- return __qcom_scm_io_writel(__scm->dev, addr, val);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_WRITE,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = addr,
+ .args[1] = val,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_io_writel);

@@ -338,22 +544,101 @@ EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);

int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
{
- return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = device_id,
+ .args[1] = spare,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);

int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
{
- return __qcom_scm_iommu_secure_ptbl_size(__scm->dev, spare, size);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = spare,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ if (size)
+ *size = res.result[0];
+
+ return ret ? : res.result[1];
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);

int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
{
- return __qcom_scm_iommu_secure_ptbl_init(__scm->dev, addr, size, spare);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
+ .arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+ QCOM_SCM_VAL),
+ .args[0] = addr,
+ .args[1] = size,
+ .args[2] = spare,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ int ret;
+
+ desc.args[0] = addr;
+ desc.args[1] = size;
+ desc.args[2] = spare;
+ desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+ QCOM_SCM_VAL);
+
+ ret = qcom_scm_call(__scm->dev, &desc, NULL);
+
+ /* the pg table has been initialized already, ignore the error */
+ if (ret == -EPERM)
+ ret = 0;
+
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);

+static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+ size_t mem_sz, phys_addr_t src, size_t src_sz,
+ phys_addr_t dest, size_t dest_sz)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_ASSIGN,
+ .arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
+ QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
+ QCOM_SCM_VAL, QCOM_SCM_VAL),
+ .args[0] = mem_region,
+ .args[1] = mem_sz,
+ .args[2] = src,
+ .args[3] = src_sz,
+ .args[4] = dest,
+ .args[5] = dest_sz,
+ .args[6] = 0,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+
+ ret = qcom_scm_call(dev, &desc, &res);
+
+ return ret ? : res.result[0];
+}
+
/**
* qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
* @mem_addr: mem region whose ownership need to be reassigned
@@ -458,7 +743,17 @@ EXPORT_SYMBOL(qcom_scm_ocmem_lock_available);
int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
u32 mode)
{
- return __qcom_scm_ocmem_lock(__scm->dev, id, offset, size, mode);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_OCMEM,
+ .cmd = QCOM_SCM_OCMEM_LOCK_CMD,
+ .args[0] = id,
+ .args[1] = offset,
+ .args[2] = size,
+ .args[3] = mode,
+ .arginfo = QCOM_SCM_ARGS(4),
+ };
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ocmem_lock);

@@ -472,7 +767,16 @@ EXPORT_SYMBOL(qcom_scm_ocmem_lock);
*/
int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size)
{
- return __qcom_scm_ocmem_unlock(__scm->dev, id, offset, size);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_OCMEM,
+ .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD,
+ .args[0] = id,
+ .args[1] = offset,
+ .args[2] = size,
+ .arginfo = QCOM_SCM_ARGS(3),
+ };
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ocmem_unlock);

@@ -507,20 +811,56 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available);
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
- int ret = qcom_scm_clk_enable();
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_HDCP,
+ .cmd = QCOM_SCM_HDCP_INVOKE,
+ .arginfo = QCOM_SCM_ARGS(10),
+ .args = {
+ req[0].addr,
+ req[0].val,
+ req[1].addr,
+ req[1].val,
+ req[2].addr,
+ req[2].val,
+ req[3].addr,
+ req[3].val,
+ req[4].addr,
+ req[4].val
+ },
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;

+ ret = qcom_scm_clk_enable();
if (ret)
return ret;

- ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+ *resp = res.result[0];
+
qcom_scm_clk_disable();
+
return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);

int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
{
- return __qcom_scm_qsmmu500_wait_safe_toggle(__scm->dev, en);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
+ .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL,
+ .args[1] = en,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+
+ return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);

diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 56ace3b..9b7b357 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -3,19 +3,64 @@
*/
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+enum qcom_scm_arg_types {
+ QCOM_SCM_VAL,
+ QCOM_SCM_RO,
+ QCOM_SCM_RW,
+ QCOM_SCM_BUFVAL,
+};
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+ (((a) & 0x3) << 4) | \
+ (((b) & 0x3) << 6) | \
+ (((c) & 0x3) << 8) | \
+ (((d) & 0x3) << 10) | \
+ (((e) & 0x3) << 12) | \
+ (((f) & 0x3) << 14) | \
+ (((g) & 0x3) << 16) | \
+ (((h) & 0x3) << 18) | \
+ (((i) & 0x3) << 20) | \
+ (((j) & 0x3) << 22) | \
+ ((num) & 0xf))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo: Metadata describing the arguments in args[]
+ * @args: The array of arguments for the secure syscall
+ */
+struct qcom_scm_desc {
+ u32 svc;
+ u32 cmd;
+ u32 arginfo;
+ u64 args[MAX_QCOM_SCM_ARGS];
+ u32 owner;
+};
+
+/**
+ * struct qcom_scm_res
+ * @result: The values returned by the secure syscall
+ */
+struct qcom_scm_res {
+ u64 result[MAX_QCOM_SCM_RETS];
+};
+
+extern int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res);
+extern int qcom_scm_call_atomic(struct device *dev,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res);

#define QCOM_SCM_SVC_BOOT 0x01
#define QCOM_SCM_BOOT_SET_ADDR 0x01
#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
-extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus);
-extern int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus);
-extern void __qcom_scm_cpu_power_down(struct device *dev, u32 flags);
-extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
-extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3

#define QCOM_SCM_SVC_PIL 0x02
@@ -25,20 +70,10 @@ extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x06
#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x07
#define QCOM_SCM_PIL_PAS_MSS_RESET 0x0a
-extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys);
-extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size);
-extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);

#define QCOM_SCM_SVC_IO 0x05
#define QCOM_SCM_IO_READ 0x01
#define QCOM_SCM_IO_WRITE 0x02
-extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned int *val);
-extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);

#define QCOM_SCM_SVC_INFO 0x06
#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x01
@@ -50,35 +85,17 @@ extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 0x03
#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 0x04
#define QCOM_SCM_MP_ASSIGN 0x16
-extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
- u32 spare);
-extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size);
-extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
- u32 size, u32 spare);
-extern int __qcom_scm_assign_mem(struct device *dev,
- phys_addr_t mem_region, size_t mem_sz,
- phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz);

#define QCOM_SCM_SVC_OCMEM 0x0f
#define QCOM_SCM_OCMEM_LOCK_CMD 0x01
#define QCOM_SCM_OCMEM_UNLOCK_CMD 0x02
-extern int __qcom_scm_ocmem_lock(struct device *dev, u32 id, u32 offset,
- u32 size, u32 mode);
-extern int __qcom_scm_ocmem_unlock(struct device *dev, u32 id, u32 offset,
- u32 size);

#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_HDCP_INVOKE 0x01
-extern int __qcom_scm_hdcp_req(struct device *dev,
- struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);

#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
-extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
- bool enable);

extern void __qcom_scm_init(void);

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-12-12 19:52    [W:0.064 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site