lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
On 2019-12-12 01:03, Doug Anderson wrote:
> Hi,
>
> On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@codeaurora.org>
> wrote:
>>
>> Add TSENS node and user thermal zone for TSENS sensors in SC7180.
>>
>> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
>> ---
>> arch/arm64/boot/dts/qcom/sc7180.dtsi | 527
>> +++++++++++++++++++++++++++++++++++
>> 1 file changed, 527 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 666e9b9..6656ffc 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -911,6 +911,26 @@
>> status = "disabled";
>> };
>>
>> + tsens0: thermal-sensor@c263000 {
>> + compatible =
>> "qcom,sc7180-tsens","qcom,tsens-v2";
>> + reg = <0 0x0c263000 0 0x1ff>, /* TM */
>> + <0 0x0c222000 0 0x1ff>; /* SROT */
>> + #qcom,sensors = <15>;
>> + interrupts = <GIC_SPI 506
>> IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "uplow";
>
> Can you also send a patch to match Amit's ("arm64: dts: sdm845:
> thermal: Add critical interrupt support") [1]. If I'm reading things
> correctly it should be 508 for tsens0 and 509 for tsens1 just like on
> sdm845.
>
> [1]
> https://lore.kernel.org/r/c536e9cdb448bbad3441f6580fa57f1f921fb580.1573499020.git.amit.kucheria@linaro.org

yes, i will send the patch for critical interrupt support.
>
>
> Thanks!
>
> -Rajeshwari

\
 
 \ /
  Last update: 2019-12-12 08:17    [W:0.063 / U:1.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site