lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RESEND PATCH v3 1/3] dt-bindings: mfd: da9062: add gpio bindings
Date
On 12 December 2019 16:04, Marco Felsch wrote:

> Add gpio device documentation to make the da9062 gpios available for
> users.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>

Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>

> ---
> Changelog:
>
> v2:
> - remove sub-node documentation
> - squash gpio properties into mfd documentation
> ---
> Documentation/devicetree/bindings/mfd/da9062.txt | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt
> b/Documentation/devicetree/bindings/mfd/da9062.txt
> index edca653a5777..089a28bc77a4 100644
> --- a/Documentation/devicetree/bindings/mfd/da9062.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9062.txt
> @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock
> da9062-onkey : : On Key
> da9062-watchdog : : Watchdog Timer
> da9062-thermal : : Thermal
> +da9062-gpio : : GPIOs
>
> The DA9061 PMIC consists of:
>
> @@ -38,6 +39,15 @@ Required properties:
> See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
> further information on IRQ bindings.
>
> +Optional properties:
> +
> +- gpio-controller : Marks the device as a gpio controller.
> +- #gpio-cells : Should be two. The first cell is the pin number and the
> + second cell is used to specify the gpio polarity.
> +
> +See Documentation/devicetree/bindings/gpio/gpio.txt for further information
> on
> +GPIO bindings.
> +
> Sub-nodes:
>
> - regulators : This node defines the settings for the LDOs and BUCKs.
> --
> 2.20.1

\
 
 \ /
  Last update: 2019-12-12 17:46    [W:0.151 / U:8.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site