lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
On 2019-12-12 00:31, Doug Anderson wrote:
> Hi,
>
> On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@codeaurora.org>
> wrote:
>>
>> Add TSENS node and user thermal zone for TSENS sensors in SC7180.
>>
>> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
>> ---
>> arch/arm64/boot/dts/qcom/sc7180.dtsi | 527
>> +++++++++++++++++++++++++++++++++++
>> 1 file changed, 527 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 666e9b9..6656ffc 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -911,6 +911,26 @@
>> status = "disabled";
>> };
>>
>> + tsens0: thermal-sensor@c263000 {
>> + compatible =
>> "qcom,sc7180-tsens","qcom,tsens-v2";
>
> Can you please send a patch listing this configuration in
> "Documentation/devicetree/bindings/thermal/qcom-tsens.yaml"? You
> shouldn't need to re-send the dts since it looks like it's already
> landed, but it's good to get the bindings happy.

Sure, i will send the patch, adding this configuration in
qcom-tsens.yaml.
>
> Thanks!
>
> -Rajeshwari

\
 
 \ /
  Last update: 2019-12-12 08:12    [W:0.068 / U:35.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site