lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/9] spi: bcm2835: Release the DMA channel if probe fails after dma_init
Date
The DMA channel was not released if either devm_request_irq() or
devm_spi_register_controller() failed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/spi/spi-bcm2835.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index fb61a620effc..662d55e9f21d 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -1327,20 +1327,22 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
dev_name(&pdev->dev), ctlr);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
- goto out_clk_disable;
+ goto out_dma_release;
}

err = devm_spi_register_controller(&pdev->dev, ctlr);
if (err) {
dev_err(&pdev->dev, "could not register SPI controller: %d\n",
err);
- goto out_clk_disable;
+ goto out_dma_release;
}

bcm2835_debugfs_create(bs, dev_name(&pdev->dev));

return 0;

+out_dma_release:
+ bcm2835_dma_release(ctlr, bs);
out_clk_disable:
clk_disable_unprepare(bs->clk);
out_controller_put:
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-12-12 14:57    [W:0.070 / U:2.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site