lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 9/9] spi: stm32: Use dma_request_chan() instead dma_request_slave_channel()
Date
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/spi/spi-stm32.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 7d75632c4151..e041f9c4ec47 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1879,17 +1879,29 @@ static int stm32_spi_probe(struct platform_device *pdev)
master->transfer_one = stm32_spi_transfer_one;
master->unprepare_message = stm32_spi_unprepare_msg;

- spi->dma_tx = dma_request_slave_channel(spi->dev, "tx");
- if (!spi->dma_tx)
+ spi->dma_tx = dma_request_chan(spi->dev, "tx");
+ if (IS_ERR(spi->dma_tx)) {
+ ret = PTR_ERR(spi->dma_tx);
+ spi->dma_tx = NULL;
+ if (ret == -EPROBE_DEFER)
+ goto err_clk_disable;
+
dev_warn(&pdev->dev, "failed to request tx dma channel\n");
- else
+ } else {
master->dma_tx = spi->dma_tx;
+ }
+
+ spi->dma_rx = dma_request_chan(spi->dev, "rx");
+ if (IS_ERR(spi->dma_rx)) {
+ ret = PTR_ERR(spi->dma_rx);
+ spi->dma_rx = NULL;
+ if (ret == -EPROBE_DEFER)
+ goto err_dma_release;

- spi->dma_rx = dma_request_slave_channel(spi->dev, "rx");
- if (!spi->dma_rx)
dev_warn(&pdev->dev, "failed to request rx dma channel\n");
- else
+ } else {
master->dma_rx = spi->dma_rx;
+ }

if (spi->dma_tx || spi->dma_rx)
master->can_dma = stm32_spi_can_dma;
@@ -1901,26 +1913,26 @@ static int stm32_spi_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "spi master registration failed: %d\n",
ret);
- goto err_dma_release;
+ goto err_pm_disable;
}

if (!master->cs_gpiods) {
dev_err(&pdev->dev, "no CS gpios available\n");
ret = -EINVAL;
- goto err_dma_release;
+ goto err_pm_disable;
}

dev_info(&pdev->dev, "driver initialized\n");

return 0;

+err_pm_disable:
+ pm_runtime_disable(&pdev->dev);
err_dma_release:
if (spi->dma_tx)
dma_release_channel(spi->dma_tx);
if (spi->dma_rx)
dma_release_channel(spi->dma_rx);
-
- pm_runtime_disable(&pdev->dev);
err_clk_disable:
clk_disable_unprepare(spi->clk);
err_master_put:
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-12-12 14:57    [W:0.071 / U:4.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site