lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 9/9] arm64: dts: rockchip: RockPro64: hook up bluetooth at uart0
From
Date


On 12.12.19 11:22, Robin Murphy wrote:
> Hi Soeren,
>
> On 11/12/2019 11:52 pm, Soeren Moch wrote:
>> With enabled wifi support (required for firmware loading) for the
>> Ampak AP6359SA based wifi/bt combo module we now also can enable
>> the bluetooth part.
>>
>> Suggested-by: Heiko Stuebner <heiko@sntech.de>
>> Signed-off-by: Soeren Moch <smoch@web.de>
>> ---
>> changes in v2:
>> - new patch
>>
>> Cc: Heiko Stuebner <heiko@sntech.de>
>> Cc: Kalle Valo <kvalo@codeaurora.org>
>> Cc: linux-wireless@vger.kernel.org
>> Cc: brcm80211-dev-list.pdl@broadcom.com
>> Cc: brcm80211-dev-list@cypress.com
>> Cc: netdev@vger.kernel.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-rockchip@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>>   .../boot/dts/rockchip/rk3399-rockpro64.dts    | 29 ++++++++++++++++++-
>>   1 file changed, 28 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>> b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>> index 9fa92790d6e0..94cc462e234d 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>> @@ -561,6 +561,20 @@
>>   };
>>
>>   &pinctrl {
>> +    bt {
>> +        bt_enable_h: bt-enable-h {
>> +            rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +
>> +        bt_host_wake_l: bt-host-wake-l {
>> +            rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
>> +        };
>> +
>> +        bt_wake_l: bt-wake-l {
>> +            rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
>> +        };
>> +    };
>> +
>>       buttons {
>>           pwrbtn: pwrbtn {
>>               rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
>> @@ -729,8 +743,21 @@
>>
>>   &uart0 {
>>       pinctrl-names = "default";
>> -    pinctrl-0 = <&uart0_xfer &uart0_cts>;
>> +    pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>>       status = "okay";
>> +
>> +    bluetooth {
>> +        compatible = "brcm,bcm43438-bt";
>> +        clocks = <&rk808 1>;
>> +        clock-names = "extclk";
>
> Is this right? Comparing the binding and the naming on the schematics,
> it seems more likely that this might be the LPO clock rather than the
> TXCO clock.
>
> Robin.
On second thought I have to agree. So we need another round on this.

Thanks for your review and bug report,
Soeren
>
>> +        device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
>> +        host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
>> +        shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
>> +        vbat-supply = <&vcc3v3_sys>;
>> +        vddio-supply = <&vcc_1v8>;
>> +    };
>>   };
>>
>>   &uart2 {
>> --
>> 2.17.1
>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>

\
 
 \ /
  Last update: 2019-12-12 11:48    [W:0.049 / U:4.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site