lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
在 2019-12-12 18:32,Marcel Holtmann 写道:
> Hi Rocky,
>
>> This patch add support for QCA6390.
>
> can we please be a bit more descriptive on what support we are adding.
>
>>
>> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 32 +++++++++++++++++++++--------
>> drivers/bluetooth/btqca.h | 1 +
>> drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++++++++++---
>> 3 files changed, 62 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ec69e5dd7bd3..75990223e5e3 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -13,6 +13,8 @@
>> #include "btqca.h"
>>
>> #define VERSION "0.1"
>
> Lets put an extra empty line here.
OK

>
>> +#define QCA_IS_3991_6390(soc_type) \
>> + ((soc_type == QCA_WCN3991) || (soc_type == QCA_QCA6390))
>
> Actually (a == b || c == d) is enough.
>
> I rather do ((a) == b || (c) == d) to ensure the parameter is properly
> protected. It is not needed in this case since the usage is simple.
OK

>
>>
>> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> enum qca_btsoc_type soc_type)
>> @@ -32,7 +34,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if (QCA_IS_3991_6390(soc_type)) {
>> event_type = 0;
>> rlen += 1;
>> rtype = EDL_PATCH_VER_REQ_CMD;
>> @@ -69,7 +71,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32
>> *soc_version,
>> goto out;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if ((QCA_IS_3991_6390(soc_type)))
>> memmove(&edl->data, &edl->data[1], sizeof(*ver));
>
> Maybe these should just be turned into a switch statement and not
> using some macro.
>
Prefer to use macro or a simple function call, there are many places
called this and use switch will make code complex

>>
>> ver = (struct qca_btsoc_version *)(edl->data);
>> @@ -139,7 +141,7 @@ int qca_send_pre_shutdown_cmd(struct hci_dev
>> *hdev)
>> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>>
>> static void qca_tlv_check_data(struct qca_fw_config *config,
>> - const struct firmware *fw)
>> + const struct firmware *fw, enum qca_btsoc_type soc_type)
>> {
>> const u8 *data;
>> u32 type_len;
>> @@ -148,6 +150,7 @@ static void qca_tlv_check_data(struct
>> qca_fw_config *config,
>> struct tlv_type_hdr *tlv;
>> struct tlv_type_patch *tlv_patch;
>> struct tlv_type_nvm *tlv_nvm;
>> + uint8_t nvm_baud_rate = config->user_baud_rate;
>>
>> tlv = (struct tlv_type_hdr *)fw->data;
>>
>> @@ -213,10 +216,14 @@ static void qca_tlv_check_data(struct
>> qca_fw_config *config,
>> * enabling software inband sleep
>> * onto controller side.
>> */
>> - tlv_nvm->data[0] |= 0x80;
>> + if (!QCA_IS_3991_6390(soc_type))
>> + tlv_nvm->data[0] |= 0x80;
>>
>> /* UART Baud Rate */
>> - tlv_nvm->data[2] = config->user_baud_rate;
>> + if ((QCA_IS_3991_6390(soc_type)))
>> + tlv_nvm->data[1] = nvm_baud_rate;
>> + else
>> + tlv_nvm->data[2] = nvm_baud_rate;
>
> These two changes are not related to the QCA6390 support. Leave them
> out and if changes are needed to fix other hardware, then send them as
> separate patch.
>
OK

>>
>> break;
>>
>> @@ -264,7 +271,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> * VSE event. WCN3991 sends version command response as a payload to
>> * command complete event.
>> */
>> - if (soc_type == QCA_WCN3991) {
>> + if ((QCA_IS_3991_6390(soc_type))) {
>> event_type = 0;
>> rlen = sizeof(*edl);
>> rtype = EDL_PATCH_TLV_REQ_CMD;
>> @@ -297,7 +304,7 @@ static int qca_tlv_send_segment(struct hci_dev
>> *hdev, int seg_size,
>> err = -EIO;
>> }
>>
>> - if (soc_type == QCA_WCN3991)
>> + if ((QCA_IS_3991_6390(soc_type)))
>> goto out;
>>
>> tlv_resp = (struct tlv_seg_resp *)(edl->data);
>> @@ -354,7 +361,7 @@ static int qca_download_firmware(struct hci_dev
>> *hdev,
>> return ret;
>> }
>>
>> - qca_tlv_check_data(config, fw);
>> + qca_tlv_check_data(config, fw, soc_type);
>>
>> segment = fw->data;
>> remain = fw->size;
>> @@ -438,6 +445,12 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> (soc_ver & 0x0000000f);
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crbtfw%02x.tlv", rom_ver);
>> + } else if (soc_type == QCA_QCA6390) {
>> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
>> + (soc_ver & 0x0000000f);
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htbtfw%02x.tlv", rom_ver);
>> +
>> } else {
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/rampatch_%08x.bin", soc_ver);
>> @@ -460,6 +473,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> else if (qca_is_wcn399x(soc_type))
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/crnv%02x.bin", rom_ver);
>> + else if (soc_type == QCA_QCA6390)
>> + snprintf(config.fwname, sizeof(config.fwname),
>> + "qca/htnv%02x.bin", rom_ver);
>> else
>> snprintf(config.fwname, sizeof(config.fwname),
>> "qca/nvm_%08x.bin", soc_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index f5795b1a3779..2f06ed7e1c50 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -127,6 +127,7 @@ enum qca_btsoc_type {
>> QCA_WCN3990,
>> QCA_WCN3991,
>> QCA_WCN3998,
>> + QCA_QCA6390,
>> };
>>
>> #if IS_ENABLED(CONFIG_BT_QCA)
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index f10bdf8e1fc5..472f468145e8 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -25,6 +25,7 @@
>> #include <linux/mod_devicetable.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> +#include <linux/acpi.h>
>> #include <linux/platform_device.h>
>> #include <linux/regulator/consumer.h>
>> #include <linux/serdev.h>
>> @@ -1355,6 +1356,16 @@ static const struct hci_uart_proto qca_proto =
>> {
>> .dequeue = qca_dequeue,
>> };
>>
>> +static const struct qca_vreg_data qca_soc_data_qca6174 = {
>> + .soc_type = QCA_ROME,
>> + .num_vregs = 0,
>> +};
>> +
>> +static const struct qca_vreg_data qca_soc_data_qca6390 = {
>> + .soc_type = QCA_QCA6390,
>> + .num_vregs = 0,
>> +};
>> +
>> static const struct qca_vreg_data qca_soc_data_wcn3990 = {
>> .soc_type = QCA_WCN3990,
>> .vregs = (struct qca_vreg []) {
>> @@ -1501,7 +1512,7 @@ static int qca_serdev_probe(struct serdev_device
>> *serdev)
>> return -ENOMEM;
>>
>> qcadev->serdev_hu.serdev = serdev;
>> - data = of_device_get_match_data(&serdev->dev);
>> + data = device_get_match_data(&serdev->dev);
>
> I would address this in a separate patch since it seems you are
> actually fixing QCA6174 support as well. Or is this because the new
> platform is ACPI based. I can’t tell since you are missing a proper
> commit message.
>
OK
>> serdev_device_set_drvdata(serdev, qcadev);
>> device_property_read_string(&serdev->dev, "firmware-name",
>> &qcadev->firmware_name);
>> @@ -1534,7 +1545,10 @@ static int qca_serdev_probe(struct
>> serdev_device *serdev)
>> goto out;
>> }
>> } else {
>> - qcadev->btsoc_type = QCA_ROME;
>> + if (data)
>> + qcadev->btsoc_type = data->soc_type;
>> + else
>> + qcadev->btsoc_type = QCA_ROME;
>> qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
>> GPIOD_OUT_LOW);
>> if (IS_ERR(qcadev->bt_en)) {
>> @@ -1670,21 +1684,41 @@ static int __maybe_unused qca_resume(struct
>> device *dev)
>>
>> static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>>
>> +#ifdef CONFIG_OF
>> static const struct of_device_id qca_bluetooth_of_match[] = {
>> - { .compatible = "qcom,qca6174-bt" },
>> + { .compatible = "qcom,qca6174-bt" .data = &qca_soc_data_qca6174},
>
> So this should be clearly a separate patch as mentioned above.
>
OK
>> + { .compatible = "qcom,qca6390-bt" .data = &qca_soc_data_qca6390},
>> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
>> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
>> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>> +#endif
>> +
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
>> + { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
>> +#endif
>> +
>>
>> static struct serdev_device_driver qca_serdev_driver = {
>> .probe = qca_serdev_probe,
>> .remove = qca_serdev_remove,
>> .driver = {
>> .name = "hci_uart_qca",
>> + #ifdef CONFIG_OF
>> .of_match_table = qca_bluetooth_of_match,
>> + #endif
>> + #ifdef CONFIG_ACPI
>> + .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
>> + #endif
>
> These ifdefs are not needed. The ACPI_PTR does this automatically and
> there is another macro for OF as well that you can use.
>
OK
>> .pm = &qca_pm_ops,
>> },
>> };
>
> Where is the patch addressing Kconfig dependency? If you support ACPI
> and DT platforms now, you need that.
>
OK
> Regards
>
> Marcel

\
 
 \ /
  Last update: 2019-12-13 04:39    [W:0.050 / U:3.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site