lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 045/243] i40e: dont restart nway if autoneg not supported
Date
From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit 7c3758f7839377ab67529cc50264a640636c47af ]

On link types that do not support autoneg, we cannot attempt to restart
nway negotiation. This results in a dead link that requires a power
cycle to remedy.

Fix this by saving off the autoneg state and checking this value before
we try to restart nway.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 5ff6caa83948c..a6b0f605a7d8b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1136,6 +1136,7 @@ static int i40e_set_pauseparam(struct net_device *netdev,
i40e_status status;
u8 aq_failures;
int err = 0;
+ u32 is_an;

/* Changing the port's flow control is not supported if this isn't the
* port's controlling PF
@@ -1148,15 +1149,14 @@ static int i40e_set_pauseparam(struct net_device *netdev,
if (vsi != pf->vsi[pf->lan_vsi])
return -EOPNOTSUPP;

- if (pause->autoneg != ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
- AUTONEG_ENABLE : AUTONEG_DISABLE)) {
+ is_an = hw_link_info->an_info & I40E_AQ_AN_COMPLETED;
+ if (pause->autoneg != is_an) {
netdev_info(netdev, "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
return -EOPNOTSUPP;
}

/* If we have link and don't have autoneg */
- if (!test_bit(__I40E_DOWN, pf->state) &&
- !(hw_link_info->an_info & I40E_AQ_AN_COMPLETED)) {
+ if (!test_bit(__I40E_DOWN, pf->state) && !is_an) {
/* Send message that it might not necessarily work*/
netdev_info(netdev, "Autoneg did not complete so changing settings may not result in an actual change.\n");
}
@@ -1207,7 +1207,7 @@ static int i40e_set_pauseparam(struct net_device *netdev,
err = -EAGAIN;
}

- if (!test_bit(__I40E_DOWN, pf->state)) {
+ if (!test_bit(__I40E_DOWN, pf->state) && is_an) {
/* Give it a little more time to try to come back */
msleep(75);
if (!test_bit(__I40E_DOWN, pf->state))
--
2.20.1


\
 
 \ /
  Last update: 2019-12-11 16:18    [W:0.525 / U:10.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site