lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v6 01/15] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
Document ROHM BD71828 PMIC regulator device tree bindings.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---

Changelog since v5:
- Remove regulator run-level properties
- Change SPDX to dual lisence
- remove forgotten comments about node name check (kept capitals as all
ROHM PMIC bindings have capital nodes and names are meaningfull)
- comment indenting styling

.../regulator/rohm,bd71828-regulator.yaml | 107 ++++++++++++++++++
1 file changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
new file mode 100644
index 000000000000..71ce032b8cf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ This module is part of the ROHM BD71828 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+ The valid names for BD71828 regulator nodes are
+ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
+ LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+ "^LDO[1-7]$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name:
+ pattern: "^ldo[1-7]$"
+ description:
+ should be "ldo1", ..., "ldo7"
+
+ "^BUCK[1-7]$":
+ type: object
+ allOf:
+ - $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name:
+ pattern: "^buck[1-7]$"
+ description:
+ should be "buck1", ..., "buck7"
+
+ rohm,dvs-run-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "RUN" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ rohm,dvs-idle-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "IDLE" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ rohm,dvs-suspend-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "SUSPEND" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ rohm,dvs-lpsr-voltage:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 3300000
+ description:
+ PMIC default "LPSR" state voltage in uV. See below table for
+ bucks which support this. 0 means disabled.
+
+ # Supported default DVS states:
+ # buck | run | idle | suspend | lpsr
+ #--------------------------------------------------------------
+ # 1, 2, 6, and 7 | supported | supported | supported (*)
+ #--------------------------------------------------------------
+ # 3, 4, and 5 | supported (**)
+ #--------------------------------------------------------------
+ #
+ #(*) LPSR and SUSPEND states use same voltage but both states have own
+ # enable /
+ # disable settings. Voltage 0 can be specified for a state to make
+ # regulator disabled on that state.
+ #
+ #(**) All states use same voltage but have own enable / disable
+ # settings. Voltage 0 can be specified for a state to make
+ # regulator disabled on that state.
+
+ required:
+ - regulator-name
+ additionalProperties: false
+additionalProperties: false
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

\
 
 \ /
  Last update: 2019-12-11 10:37    [W:0.165 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site