[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] tpm_tis: reserve chip for duration of tpm_tis_core_init
On Wed Dec 11 19, Dan Williams wrote:
>On Wed, Dec 11, 2019 at 3:27 PM Jerry Snitselaar <> wrote:
>> On Wed Dec 11 19, Jerry Snitselaar wrote:
>> >Instead of repeatedly calling tpm_chip_start/tpm_chip_stop when
>> >issuing commands to the tpm during initialization, just reserve the
>> >chip after wait_startup, and release it when we are ready to call
>> >tpm_chip_register.
>> >
>> >Cc: Christian Bundy <>
>> >Cc: Dan Williams <>
>> >Cc: Peter Huewe <>
>> >Cc: Jarkko Sakkinen <>
>> >Cc: Jason Gunthorpe <>
>> >Cc: Stefan Berger <>
>> >Cc:
>> >Cc:
>> Typo on the list address, do you want me to resend Jarkko?
>> >Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
>> >Signed-off-by: Jerry Snitselaar <>
>> >---
>> I did some initial testing with both a 1.2 device and a 2.0 device here.
>> Christian, can you verify that this still solves your timeouts problem
>> you were seeing? Dan, can you try this on the internal system with
>> the interrupt issues? I will see if I can get the t490s owner to run
>> it as well.
>Will do. I assume you'd also want to add 'Fixes: 5b359c7c4372
>("tpm_tis_core: Turn on the TPM before probing IRQ's")' if it works?

Yes. I'm not certain this deals with the interrupt issue though, so
didn't want to stick it on there yet. I guess it should go on there
anyways since it is replacing that code. I'll post a v2.

 \ /
  Last update: 2019-12-12 00:50    [W:0.071 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site