[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/5] Add rtc support for rn5t618 mfd
In the variant RC5T619 the mfd has an RTC. This patchset adds
support for it. To do so it adds the missing register defines in
rn5t618.h and general irq handling for that.
It seems that the irq definitions are the same except missing RTC
but due to missing ability to test that I do not add them here.

The rtc driver itself is based on
but heavily reworked.

It was tested on the Kobo Clara HD.

Changes in v4:
- use macros for IRQ definitions
- merge rn5t618-core.c and rn5t618-irq.c

Changes in v3:
- alignment cleanup
- output cleanup, remove useless toggling of alarm flag in rtc probe
- updated bindings description, so patch 1/5 becomes 2/6 and so on

Changes in v2:
- no dead code in irq code
- various improvements and cleanups in rtc driver itself

Andreas Kemnade (5):
dt-bindings: mfd: rn5t618: Document optional property interrupts
mfd: rn5t618: add IRQ support
mfd: rn5t618: add RTC related registers
mfd: rn5t618: add more subdevices
rtc: rc5t619: add ricoh rc5t619 RTC driver

Documentation/devicetree/bindings/mfd/rn5t618.txt | 4 +
drivers/mfd/Kconfig | 1 +
drivers/mfd/rn5t618.c | 106 +++++-
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-rc5t619.c | 444 ++++++++++++++++++++++
include/linux/mfd/rn5t618.h | 26 ++
7 files changed, 590 insertions(+), 2 deletions(-)
create mode 100644 drivers/rtc/rtc-rc5t619.c


 \ /
  Last update: 2019-12-11 22:55    [W:0.067 / U:18.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site