lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/7] usb: musb: jz4740: Add support for DMA
Date
Add support for using the DMA channels built into the Inventra IP.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
v2: Rebase on 5.4-rc4
v3: Rebase on 5.5-rc1

drivers/usb/musb/Kconfig | 2 +-
drivers/usb/musb/jz4740.c | 21 +++++++++++++++------
2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 52f8e2b57ad5..210e4844c92a 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -142,7 +142,7 @@ config USB_UX500_DMA

config USB_INVENTRA_DMA
bool 'Inventra'
- depends on USB_MUSB_OMAP2PLUS
+ depends on USB_MUSB_OMAP2PLUS || USB_MUSB_JZ4740
help
Enable DMA transfers using Mentor's engine.

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 5261f8dfedec..bbecfdee6ea1 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -25,11 +25,14 @@ struct jz4740_glue {
static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
+ irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
struct musb *musb = __hci;

spin_lock_irqsave(&musb->lock, flags);

+ if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
+ retval_dma = musbhs_dma_controller_irq(musb->dma_controller);
+
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
@@ -47,7 +50,10 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)

spin_unlock_irqrestore(&musb->lock, flags);

- return retval;
+ if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
}

static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
@@ -91,18 +97,19 @@ static int jz4740_musb_init(struct musb *musb)
musb->dyn_fifo = true;

musb->isr = jz4740_musb_interrupt;
+ musb->dma_share_usb_irq = true;

return 0;
}

-/*
- * DMA has not been confirmed to work with CONFIG_USB_INVENTRA_DMA,
- * so let's not set up the dma function pointers yet.
- */
static const struct musb_platform_ops jz4740_musb_ops = {
.quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
.fifo_mode = 2,
.init = jz4740_musb_init,
+#ifdef CONFIG_USB_INVENTRA_DMA
+ .dma_init = musbhs_dma_controller_create,
+ .dma_exit = musbhs_dma_controller_destroy,
+#endif
};

static int jz4740_probe(struct platform_device *pdev)
@@ -137,6 +144,8 @@ static int jz4740_probe(struct platform_device *pdev)
}

musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &musb->dev.coherent_dma_mask;
+ musb->dev.coherent_dma_mask = DMA_BIT_MASK(32);

glue->dev = &pdev->dev;
glue->musb = musb;
--
2.24.0
\
 
 \ /
  Last update: 2019-12-10 18:12    [W:0.074 / U:6.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site