lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v1] sdhci: tegra: Add workaround for Broadcom WiFi
From
Date
10.12.2019 17:15, Dmitry Osipenko пишет:
> 10.12.2019 15:52, Thierry Reding пишет:
>> On Tue, Dec 10, 2019 at 04:40:11AM +0300, Dmitry Osipenko wrote:
>>> All Tegra20 boards that have embedded Broadcom WiFi SDIO chip are affected
>>> by a problem where WiFi chip reports CCCR v1.10, while it should v1.20.
>>> In a result high-speed mode isn't enabled for the WiFi card and this
>>> results in a malfunctioning SDIO communication.
>>>
>>> brcmfmac: brcmf_sdio_readframes: read 304 bytes from channel 1 failed: -84
>>> brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
>>>
>>> Downstream kernels are overriding card's CCCR info in SDHCI driver to fix
>>> the problem, let's do the same in upstream.
>>>
>>> The change is inspired by omap_hsmmc_init_card() of OMAP's HSMMC driver,
>>> which overrides card's info for the TI wl1251 WiFi.
>>>
>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>> ---
>>> drivers/mmc/host/sdhci-tegra.c | 28 ++++++++++++++++++++++++++++
>>> 1 file changed, 28 insertions(+)
>>
>> This seems like the wrong place to do this. If this is specific to this
>> WiFi SDIO chip this should be handled at the SDIO card or function
>> level. It seems like the SDIO infrastructure doesn't currently allow
>> this because the OF nodes are attached to the card after
>> mmc_sdio_init_card(), whereas it seems like the quirk is already needed
>> during mmc_sdio_init_card().
>>
>> That said, I think we could have some common code that's executed as
>> part of mmc_attach_sdio() (and before mmc_sdio_init_card()).
>>
>> Actually, it looks like we already have something like that.
>> mmc_sdio_init_card() calls mmc_fixup_device() with sdio_fixup_methods
>> after doing some very basic initialization. Do you know if things start
>> to go wrong before or after that point? It might be worth looking at
>> that SDIO fixup array and add something that would override the CCCR
>> support. That would fix things in a more generic way rather than
>> requiring every host controller driver to duplicate this quirk.
>
> Hello Thierry,
>
> Thank you very much for the suggestion, looks like indeed it is possible
> to make workaround in a generic way.
>
> Ulf / Adrian, will something like this be acceptable:
>
> diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
> index 7bd392d55cfa..a6001f210b9e 100644
> --- a/drivers/mmc/core/card.h
> +++ b/drivers/mmc/core/card.h
> @@ -150,6 +150,12 @@ static inline void __maybe_unused
> add_limit_rate_quirk(struct mmc_card *card,
> card->quirk_max_rate = data;
> }
>
> +static inline void __maybe_unused add_high_speed_quirk(struct mmc_card
> *card,
> + int data)
> +{
> + card->cccr.high_speed = data;
> +}
> +
> /*
> * Quirk add/remove for MMC products.
> */
> diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
> index 3dba15bccce2..a824c0caa7fb 100644
> --- a/drivers/mmc/core/quirks.h
> +++ b/drivers/mmc/core/quirks.h
> @@ -142,6 +142,9 @@ static const struct mmc_fixup sdio_fixup_methods[] = {
> SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887WLAN,
> add_limit_rate_quirk, 150000000),
>
> + SDIO_FIXUP(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329,
> + add_high_speed_quirk, 1),
> +
> END_FIXUP
> };
>
> [snip]

On second thought, perhaps it's not very universal to change card's CCCR
and this should be a better variant:

diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index 7bd392d55cfa..b5e44fcda7fb 100644
--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -222,4 +222,9 @@ static inline int mmc_card_broken_hpi(const struct
mmc_card *c)
return c->quirks & MMC_QUIRK_BROKEN_HPI;
}

+static inline int mmc_card_need_high_speed_toggle(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_HIGH_SPEED_CARD;
+}
+
#endif
diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
index 3dba15bccce2..c9af62a1d44b 100644
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -142,6 +142,9 @@ static const struct mmc_fixup sdio_fixup_methods[] = {
SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887WLAN,
add_limit_rate_quirk, 150000000),

+ SDIO_FIXUP(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329,
+ add_quirk, MMC_QUIRK_HIGH_SPEED_CARD),
+
END_FIXUP
};

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index ebb387aa5158..ac12c7631ec5 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -323,7 +323,7 @@ static int mmc_sdio_switch_hs(struct mmc_card *card,
int enable)
if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
return 0;

- if (!card->cccr.high_speed)
+ if (!mmc_card_need_high_speed_toggle(card) && !card->cccr.high_speed)
return 0;

ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index cf3780a6ccc4..06f697e6d002 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -269,6 +269,7 @@ struct mmc_card {
#define MMC_QUIRK_BROKEN_IRQ_POLLING (1<<11) /* Polling SDIO_CCCR_INTx
could create a fake interrupt */
#define MMC_QUIRK_TRIM_BROKEN (1<<12) /* Skip trim */
#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */
+#define MMC_QUIRK_HIGH_SPEED_CARD (1<<14) /* Card is high-speed capable */

bool reenable_cmdq; /* Re-enable Command Queue */
\
 
 \ /
  Last update: 2019-12-10 15:33    [W:0.042 / U:2.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site