lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 144/177] cpufreq: Register drivers only after CPU devices have been registered
Date
From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 46770be0cf94149ca48be87719bda1d951066644 ]

The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.

This happens due to following sequence of events:

- cpufreq_register_driver()
- subsys_interface_register()
- return 0; //successful registration of driver

... at a later point of time

- register_cpu();
- device_register();
- bus_probe_device();
- sif->add_dev();
- cpufreq_add_dev();
- get_cpu_device(); //FAILS
- per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device()
- return 0; //CPU registered successfully

Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.

This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else
return -EPROBE_DEFER.

Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/cpufreq.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 9d8d64f706e06..e35c397b1259f 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2480,6 +2480,13 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
if (cpufreq_disabled())
return -ENODEV;

+ /*
+ * The cpufreq core depends heavily on the availability of device
+ * structure, make sure they are available before proceeding further.
+ */
+ if (!get_cpu_device(0))
+ return -EPROBE_DEFER;
+
if (!driver_data || !driver_data->verify || !driver_data->init ||
!(driver_data->setpolicy || driver_data->target_index ||
driver_data->target) ||
--
2.20.1
\
 
 \ /
  Last update: 2019-12-10 22:39    [W:0.333 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site