[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH net-next 0/6] net-next: dsa: mt7530: add support for MT7531
This patch series adds support for MT7531.

MT7531 is the next generation of MT7530 which could be found on Mediatek
router platforms such as MT7622 or MT7629.

It is also a 7-ports switch with 5 giga embedded phys, 2 cpu ports, and
the same MAC logic of MT7530. Cpu port 6 only supports HSGMII interface.
Cpu port 5 supports either RGMII or HSGMII in different HW SKU. Due to
support for HSGMII interface, pll, and pad setting are different from

Landen Chao (6):
net: dsa: mt7530: Refine message in Kconfig
net: dsa: mt7530: Extend device data ready for adding a new hardware
dt-bindings: net: dsa: add new MT7531 binding to support MT7531
net: dsa: mt7530: Add the support of MT7531 switch
arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board
arm64: dts: mt7622: add mt7531 dsa to bananapi-bpi-r64 board

.../devicetree/bindings/net/dsa/mt7530.txt | 77 +-
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 63 +-
drivers/net/dsa/Kconfig | 6 +-
drivers/net/dsa/mt7530.c | 874 ++++++++++++++++--
drivers/net/dsa/mt7530.h | 173 +++-
6 files changed, 1168 insertions(+), 75 deletions(-)

 \ /
  Last update: 2019-12-10 09:16    [W:0.140 / U:7.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site