lkml.org 
[lkml]   [2019]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 130/191] ARM: dts: meson8b: odroidc1: enable the SAR ADC
Date
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit fd6643142a0c5ab4d423ed7173a0be414d509214 ]

Odroid-C1 exposes ADC channels 0 and 1 on the GPIO headers. NOTE: Due
to the SoC design these are limited to 1.8V (instead of 3.3V like all
other pins).
Enable the SAR ADC to enable voltage measurements on these pins.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/meson8b-odroidc1.dts | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 8fdeeffecbdbc..8a09071d712a5 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -153,6 +153,11 @@
pinctrl-names = "default";
};

+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
&sdio {
status = "okay";

--
2.20.1
\
 
 \ /
  Last update: 2019-11-10 04:11    [W:0.634 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site