lkml.org 
[lkml]   [2019]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.14 098/109] scsi: NCR5380: Handle BUS FREE during reselection
Date
From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit ca694afad707cb3ae2fdef3b28454444d9ac726e ]

The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out
procedure", that a target may assert RST or go to BUS FREE phase if the
initiator does not respond within 200 us. Something like this has been
observed with AztecMonster II target. When it happens, all we can do is wait
for the target to try again.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/NCR5380.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 48f123601f575..a85c5155fcf40 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2045,6 +2045,9 @@ static void NCR5380_reselect(struct Scsi_Host *instance)

if (NCR5380_poll_politely(hostdata,
STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ if ((NCR5380_read(STATUS_REG) & (SR_BSY | SR_SEL)) == 0)
+ /* BUS FREE phase */
+ return;
shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
do_abort(instance);
return;
--
2.20.1
\
 
 \ /
  Last update: 2019-11-10 04:00    [W:0.407 / U:2.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site