lkml.org 
[lkml]   [2019]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] ARM64: dts: sun50i-h6-pine-h64: state that the DT supports the modelA
Date
The current sun50i-h6-pine-h64 DT does not specify which model (A or B)
it supports.
When this file was created, only modelA was existing, but now both model
exists and with the time, this DT drifted to support the model B since it is
the most common one.
Furtheremore, some part of the model A does not work with it like ethernet and
HDMI connector (as confirmed by Jernej on IRC).

So it is time to settle the issue, and the easiest way was to state that
this DT is for model B.
Easiest since only a small name changes is required.
Doing the opposite (stating this file is for model A) will add changes (for
ethernet and HDMI) and so, will break too many setup.

But as asked by the maintainer this patch state this file is for model A.
In the process this patch adds the missing compoments to made it work on
model A.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
.../devicetree/bindings/arm/sunxi.yaml | 4 ++--
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 19 +++++++++++++++----
2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 8a1e38a1d7ab..b8ec616c2538 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -599,9 +599,9 @@ properties:
- const: pine64,pine64-plus
- const: allwinner,sun50i-a64

- - description: Pine64 PineH64
+ - description: Pine64 PineH64 model A
items:
- - const: pine64,pine-h64
+ - const: pine64,pine-h64-modelA
- const: allwinner,sun50i-h6

- description: Pine64 LTS
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 74899ede00fb..1d9afde4d3d7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -10,8 +10,8 @@
#include <dt-bindings/gpio/gpio.h>

/ {
- model = "Pine H64";
- compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+ model = "Pine H64 model A";
+ compatible = "pine64,pine-h64-modelA", "allwinner,sun50i-h6";

aliases {
ethernet0 = &emac;
@@ -22,9 +22,10 @@
stdout-path = "serial0:115200n8";
};

- connector {
+ hdmi_connector: connector {
compatible = "hdmi-connector";
type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */

port {
hdmi_con_in: endpoint {
@@ -52,6 +53,16 @@
};
};

+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usb_vbus: vbus {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
@@ -68,7 +79,7 @@
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
- phy-supply = <&reg_aldo2>;
+ phy-supply = <&reg_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
allwinner,tx-delay-ps = <200>;
status = "okay";
--
2.23.0
\
 
 \ /
  Last update: 2019-11-09 17:21    [W:0.050 / U:3.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site