lkml.org 
[lkml]   [2019]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/2] PCI: Introduce pcie_wait_for_link_delay()
Date
On Thursday, November 7, 2019 1:18:46 PM CET Mika Westerberg wrote:
> This is otherwise similar to pcie_wait_for_link() but allows passing
> custom activation delay in milliseconds.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

No issues found:

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> ---
> drivers/pci/pci.c | 21 ++++++++++++++++++---
> 1 file changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index ecc775793c3c..7083adc07f5c 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4588,14 +4588,17 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
>
> return pci_dev_wait(dev, "PM D3hot->D0", PCIE_RESET_READY_POLL_MS);
> }
> +
> /**
> - * pcie_wait_for_link - Wait until link is active or inactive
> + * pcie_wait_for_link_delay - Wait until link is active or inactive
> * @pdev: Bridge device
> * @active: waiting for active or inactive?
> + * @delay: Delay to wait after link has become active (in ms)
> *
> * Use this to wait till link becomes active or inactive.
> */
> -bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,
> + int delay)
> {
> int timeout = 1000;
> bool ret;
> @@ -4632,13 +4635,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> timeout -= 10;
> }
> if (active && ret)
> - msleep(100);
> + msleep(delay);
> else if (ret != active)
> pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
> active ? "set" : "cleared");
> return ret == active;
> }
>
> +/**
> + * pcie_wait_for_link - Wait until link is active or inactive
> + * @pdev: Bridge device
> + * @active: waiting for active or inactive?
> + *
> + * Use this to wait till link becomes active or inactive.
> + */
> +bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +{
> + return pcie_wait_for_link_delay(pdev, active, 100);
> +}
> +
> void pci_reset_secondary_bus(struct pci_dev *dev)
> {
> u16 ctrl;
>




\
 
 \ /
  Last update: 2019-11-07 14:45    [W:0.056 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site