[lkml]   [2019]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/4] usb: xhci: Add support for Renesas USB controllers
This series add support for Renesas USB controllers uPD720201 and uPD720202.
These require firmware to be loaded and in case devices have ROM those can
also be programmed if empty. If ROM is programmed, it runs from ROM as well.

This includes two patches from Christian which supported these controllers
w/o ROM and later my patches for ROM support and multiple firmware versions.

Changes in v5:
Added a debugfs rom erase patch, helps in debugging
Squashed patch 1 & 2 as requested by Mathias

Changes in v4:
Rollback the delay values as we got device failures

Changes in v3:
Dropped patch 2 as discussed with Christian
Removed aligned 8 bytes check
Change order for firware search from highest version to lowest
Added entry for new firmware for device 0x14 as well
Add tested by Christian

Changes in v2:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recurion for renesas_fw_download
added comment for multiple fw order

Christian Lamparter (1):
usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM

Vinod Koul (3):
usb: xhci: Add ROM loader for uPD720201
usb: xhci: allow multiple firmware versions
usb: xhci: provide a debugfs hook for erasing rom

drivers/usb/host/xhci-pci.c | 911 ++++++++++++++++++++++++++++++++++++
1 file changed, 911 insertions(+)


 \ /
  Last update: 2019-11-06 09:40    [W:0.090 / U:31.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site