[lkml]   [2019]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
On Mon, Nov 04, 2019 at 06:19:30AM +0000, Peng Fan wrote:
> From: Peng Fan <>
> With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
> will be reset. Without CONFIG_AT803X_PHY as y, board will stop
> booting in NFS DHCP, because phy is not ready. So mark
> CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
> Signed-off-by: Peng Fan <>

Applied, thanks.

 \ /
  Last update: 2019-11-04 08:26    [W:0.054 / U:25.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site