lkml.org 
[lkml]   [2019]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] power: reset: at91-reset: add sysfs interface to the power on reason
Date


On 29.11.2019 13:02, Alexandre Belloni wrote:

> On 29/11/2019 10:57:45+0000, Claudiu.Beznea@microchip.com wrote:
>> Hi Kamel,
>>
>> On 17.10.2019 15:40, Kamel Bouhara wrote:
>>> This patch export the power on reason through the sysfs interface and
>>> introduce some generic reset sources.
>>> Update the ABI documentation to list current power on sources.
>>>
>>> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
>>> ---
>>> .../sysfs-devices-platform-power-on-reason | 14 ++++++
>>> drivers/power/reset/at91-reset.c | 44 +++++++++++++------
>>> include/linux/power/power_on_reason.h | 19 ++++++++
>>> 3 files changed, 64 insertions(+), 13 deletions(-)
>>> create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
>>> create mode 100644 include/linux/power/power_on_reason.h
>>>
>>> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason b/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
>>> new file mode 100644
>>> index 000000000000..83daeb9b1aa2
>>> --- /dev/null
>>> +++ b/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
>>> @@ -0,0 +1,14 @@
>>> +What: /sys/devices/platform/.../power_on_reason
>>> +
>>> +Date: October 2019
>>> +KernelVersion: 5.4
>>> +Contact: Kamel Bouhara <kamel.bouhara@bootlin.com>
>>> +Description: This file shows system power on reason.
>>> + The possible sources are:
>>> + General System Power-ON, RTC wakeup, Watchdog timeout,
>>> + Software Reset, User pressed reset button,
>>> + CPU Clock failure, 32.768kHz Oscillator Failure,
>>> + Low power mode exit, Unknown.
>>> +
>>> + The file is read only.
>>> +
>>> diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
>>> index 44ca983a49a1..3cb2df40af37 100644
>>> --- a/drivers/power/reset/at91-reset.c
>>> +++ b/drivers/power/reset/at91-reset.c
>>> @@ -17,7 +17,7 @@
>>> #include <linux/of_address.h>
>>> #include <linux/platform_device.h>
>>> #include <linux/reboot.h>
>>> -
>>> +#include <linux/power/power_on_reason.h>
>>> #include <soc/at91/at91sam9_ddrsdr.h>
>>> #include <soc/at91/at91sam9_sdramc.h>
>>>
>>> @@ -146,42 +146,42 @@ static int samx7_restart(struct notifier_block *this, unsigned long mode,
>>> return NOTIFY_DONE;
>>> }
>>>
>>> -static void __init at91_reset_status(struct platform_device *pdev)
>>> +static const char *at91_reset_reason(struct platform_device *pdev)
>>> {
>>> const char *reason;
>>> u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
>>>
>>> switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
>>> case RESET_TYPE_GENERAL:
>>> - reason = "general reset";
>>> + reason = POWER_ON_REASON_GENERAL;
>>> break;
>>> case RESET_TYPE_WAKEUP:
>>> - reason = "wakeup";
>>> + reason = POWER_ON_REASON_RTC;
>>> break;
>>> case RESET_TYPE_WATCHDOG:
>>> - reason = "watchdog reset";
>>> + reason = POWER_ON_REASON_WATCHDOG;
>>> break;
>>> case RESET_TYPE_SOFTWARE:
>>> - reason = "software reset";
>>> + reason = POWER_ON_REASON_SOFTWARE;
>>> break;
>>> case RESET_TYPE_USER:
>>> - reason = "user reset";
>>> + reason = POWER_ON_REASON_USER;
>>> break;
>>> case RESET_TYPE_CPU_FAIL:
>>> - reason = "CPU clock failure detection";
>>> + reason = POWER_ON_REASON_CPU_FAIL;
>>> break;
>>> case RESET_TYPE_XTAL_FAIL:
>>> - reason = "32.768 kHz crystal failure detection";
>>> + reason = POWER_ON_REASON_XTAL_FAIL;
>>> break;
>>> case RESET_TYPE_ULP2:
>>> - reason = "ULP2 reset";
>>> + reason = POWER_ON_REASON_LOW_POWER;
>>> break;
>>> default:
>>> - reason = "unknown reset";
>>> + reason = POWER_ON_REASON_UNKNOWN;
>>> break;
>>> }
>>>
>>> - dev_info(&pdev->dev, "Starting after %s\n", reason);
>>> + return reason;
>>> }
>>>
>>> static const struct of_device_id at91_ramc_of_match[] = {
>>> @@ -204,6 +204,17 @@ static struct notifier_block at91_restart_nb = {
>>> .priority = 192,
>>> };
>>>
>>> +static ssize_t power_on_reason_show(struct device *dev,
>>> + struct device_attribute *attr,
>>> + char *buf)
>>> +{
>>> + struct platform_device *pdev = to_platform_device(dev);
>>> +
>>> + return sprintf(buf, "%s\n", at91_reset_reason(pdev));
>>> +}
>>> +
>>> +static DEVICE_ATTR_RO(power_on_reason);
>>> +
>>> static int __init at91_reset_probe(struct platform_device *pdev)
>>> {
>>> const struct of_device_id *match;
>>> @@ -248,7 +259,14 @@ static int __init at91_reset_probe(struct platform_device *pdev)
>>> return ret;
>>> }
>>>
>>> - at91_reset_status(pdev);
>>> + ret = device_create_file(&pdev->dev, &dev_attr_power_on_reason);
>>> + if (ret) {
>>> + dev_err(&pdev->dev, "Could not create sysfs entry\n");
>>> + return ret;
>>> + }
>>> +
>>> + dev_info(&pdev->dev, "Starting after %s reset\n",
>>> + at91_reset_reason(pdev));
>>>
>>> return 0;
>>> }
>>> diff --git a/include/linux/power/power_on_reason.h b/include/linux/power/power_on_reason.h
>>> new file mode 100644
>>> index 000000000000..9978cc757427
>>> --- /dev/null
>>> +++ b/include/linux/power/power_on_reason.h
>>> @@ -0,0 +1,19 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>> +/*
>>> + * Author: Kamel Bouhra <kamel.bouhara@bootlin.com>
>>> + */
>>> +
>>> +#ifndef POWER_ON_REASON_H
>>> +#define POWER_ON_REASON_H
>>> +
>>> +#define POWER_ON_REASON_GENERAL "General"
>>> +#define POWER_ON_REASON_RTC "RTC wakeup"
>>> +#define POWER_ON_REASON_WATCHDOG "Watchdog timeout"
>>> +#define POWER_ON_REASON_SOFTWARE "Software"
>>> +#define POWER_ON_REASON_USER "User"
>>> +#define POWER_ON_REASON_CPU_FAIL "CPU Clock Failure"
>>> +#define POWER_ON_REASON_XTAL_FAIL "32.768k Crystal oscillator Failure"

Hi,

Looks rather odd to have a hardcoded crystal value inside a generic header.
Also how is REASON_CPU_FAIL related to CPU Clock ?

Eugen

>>> +#define POWER_ON_REASON_LOW_POWER "Low power exit"
>>> +#define POWER_ON_REASON_UNKNOWN "Unknown"
>>> +
>>> +#endif /* POWER_ON_REASON_H */
>>
>> Is this new header necessary?
>>
>
> Yes because we want other drivers to be able to reuse them as-is so the
> ABI is stable.
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
\
 
 \ /
  Last update: 2019-11-29 12:15    [W:0.069 / U:9.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site