lkml.org 
[lkml]   [2019]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
Hi Oliver,

On Wed, Nov 27, 2019 at 9:47 AM Oliver Graute <oliver.graute@gmail.com> wrote:

> I'am using this DTS which I'am currently working on:
>
> https://lists.infradead.org/pipermail/linux-arm-kernel/2019-October/689501.html
> >
> > I bet one dollar that 6d4cd041f0af triggered a latent bug in the DTS.
>
> So what should I fix in my device tree?

Some suggestions you could try:

- Try to use phy-mode = "rgmii-id"; instead,
- The PHY address 0 does not match the reg value of 4, so you need to
double check the PHY address and make the @ and reg values to match.
- If you have a GPIO connected to the Ethernet PHY reset pin, then you
should describe it in the dts and also provide a delay as per the
AR803X datasheet.

Regards,

Fabio Estevam

\
 
 \ /
  Last update: 2019-11-27 13:57    [W:0.080 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site