lkml.org 
[lkml]   [2019]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 088/132] scsi: megaraid_sas: Fix msleep granularity
Date
From: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>

[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ]

In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this. As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.

Change the granularity of msleep() call from 1ms to 1000ms.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5e0bac8de6381..7be968f60b590 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3585,12 +3585,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
/*
* The cur_state should not last for more than max_wait secs
*/
- for (i = 0; i < (max_wait * 1000); i++) {
+ for (i = 0; i < max_wait; i++) {
curr_abs_state = instance->instancet->
read_fw_status_reg(instance->reg_set);

if (abs_state == curr_abs_state) {
- msleep(1);
+ msleep(1000);
} else
break;
}
--
2.20.1


\
 
 \ /
  Last update: 2019-11-27 22:44    [W:0.556 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site