Messages in this thread |  | | Subject | Re: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y | From | Marc Gonzalez <> | Date | Wed, 27 Nov 2019 09:47:37 +0100 |
| |
On 26/11/2019 15:54, Oliver Graute wrote:
> this patch broke my imx8qm nfs setup. With the generic phy driver my > board is booting fine. But with the AT803X_PHY=y enabled I'm running > into the following phy issue. So on my side it looks inverse as on > yours. What is the best proposal to fix this? > > [ 5.550442] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off > [ 5.573206] Sending DHCP requests ...... timed out! > [ 95.339702] IP-Config: Retrying forever (NFS root)... > [ 95.348873] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL) > [ 99.438443] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off > [ 99.461206] Sending DHCP requests ...... timed out!
Which DTS are you using?
I bet one dollar that 6d4cd041f0af triggered a latent bug in the DTS.
Regards.
|  |