lkml.org 
[lkml]   [2019]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/11] Move PMC clocks into Tegra PMC driver
Date
Tegra PMC has clk_out_1, clk_out_2, clk_out_3 and blink controls which
are currently registered by Tegra clock driver using clk_regiser_mux and
clk_register_gate which performs direct Tegra PMC register access.

When Tegra PMC is in secure mode, any access from non-secure world will
not go through.

This patch series adds these Tegra PMC clocks and blink controls to Tegra
PMC driver with PMC as clock provider and removed them from Tegra clock
driver. This also adds PMC specific clock id's to use in device tree and
removed clock ids of PMC clock from Tegra clock driver.

This series also includes patch to update clock provider from tegra_car
to pmc in the device tree tegra210-smaug.dts that uses clk_out_2 from PMC.

[v2]: Changes between v1 and v2 are
- v2 includes patches for adding clk_out_1, clk_out_2, clk_out_3,
blink controls to Tegra PMC driver and removing clk-tegra-pmc.
- feedback related to pmc clocks in Tegra PMC driver from v1
- Removed patches for WB0 PLLM overrides and PLLE IDDQ PMC programming
by the clock driver using helper functions from Tegra PMC.

Note:
To use helper functions from PMC driver, PMC early init need to
happen prior to using helper functions and these helper functions are
for PLLM Override and PLLE IDDQ programming in PMC during PLLM/PLLE
clock registration which happen in clock_init prior to Tegra PMC
probe.
Moving PLLM/PLLE clocks registration to happen after Tegra PMC
impacts other clocks EMC, MC and corresponding tegra_emc_init and
tegra_mc_init.
This implementation of configuring PMC registers thru helper
functions in clock driver needs proper changes across PMC, Clock,
EMC and MC inits to have it work across all Tegra platforms.

Currently PLLM Override is not enabled in the bootloader so proper
patches for this fix will be taken care separately.

[v1]: v1 includes patches for below fixes.
- adding clk_out_1, clk_out_2, clk_out_3, blink controls to Tegra PMC
driver and removing clk-tegra-pmc.
- updated clock provider from tegra_car to pmc in the device tree
tegra210-smaug.dts that uses clk_out_2.
- Added helper functions in PMC driver for WB0 PLLM overrides and PLLE
IDDQ programming to use by clock driver and updated clock driver to
use these helper functions and removed direct PMC access from clock
driver and all pmc base address references in clock driver.


Sowjanya Komatineni (11):
dt-bindings: soc: tegra-pmc: Add Tegra PMC clock ids
soc: tegra: Add Tegra PMC clock registrations into PMC driver
dt-bindings: soc: tegra-pmc: Add id for Tegra PMC blink control
soc: pmc: Add blink output clock registration to Tegra PMC
clk: tegra: Remove tegra_pmc_clk_init along with clk ids
dt-bindings: clock: tegra: Remove pmc clock ids from clock dt-bindings
arm: tegra: Add clock-cells property to Tegra PMC
arm64: tegra: Add clock-cells property to Tegra pmc
dt-bindings: Add Tegra PMC clock configuration bindings
arm64: tegra: smaug: Change clk_out_2 provider from tegra_car to pmc
ASoC: nau8825: change Tegra clk_out_2 provider from tegra_car to pmc

.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 45 ++-
.../devicetree/bindings/sound/nau8825.txt | 2 +-
arch/arm/boot/dts/tegra114.dtsi | 4 +-
arch/arm/boot/dts/tegra124.dtsi | 4 +-
arch/arm/boot/dts/tegra20.dtsi | 4 +-
arch/arm/boot/dts/tegra30.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 +
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 2 +-
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 +
drivers/clk/tegra/Makefile | 1 -
drivers/clk/tegra/clk-id.h | 7 -
drivers/clk/tegra/clk-tegra-pmc.c | 122 -------
drivers/clk/tegra/clk-tegra114.c | 11 -
drivers/clk/tegra/clk-tegra124.c | 27 +-
drivers/clk/tegra/clk-tegra20.c | 4 -
drivers/clk/tegra/clk-tegra210.c | 11 -
drivers/clk/tegra/clk-tegra30.c | 12 -
drivers/clk/tegra/clk.h | 1 -
drivers/soc/tegra/pmc.c | 379 +++++++++++++++++++++
include/dt-bindings/clock/tegra114-car.h | 14 +-
include/dt-bindings/clock/tegra124-car-common.h | 14 +-
include/dt-bindings/clock/tegra20-car.h | 2 +-
include/dt-bindings/clock/tegra210-car.h | 14 +-
include/dt-bindings/clock/tegra30-car.h | 14 +-
include/dt-bindings/soc/tegra-pmc.h | 19 ++
27 files changed, 501 insertions(+), 226 deletions(-)
delete mode 100644 drivers/clk/tegra/clk-tegra-pmc.c
create mode 100644 include/dt-bindings/soc/tegra-pmc.h

--
2.7.4

\
 
 \ /
  Last update: 2019-11-27 06:00    [W:0.255 / U:1.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site