[lkml]   [2019]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v1 0/4] Support MTK reboot mode driver

This driver parses the reboot commands like "reboot bootloader"
and "reboot recovery" to get a boot mode described in the
device tree , then call the write interfae to store the boot
mode in mtk RGU (reset generation unit) non-volatile register,
which can be read by the bootloader after system reboot, then
the bootloader can take different action according to the mode

Freddy Hsin (4):
power: reset: add reboot mode driver
watchdog: populate reboot mode node in toprgu node of MTK RGU (Reset
Generation Unit)
soc: mediatek: add reboot-mode header
dt-binding: power: reset: Add documentation for MTK RGU (Reset
Gernation Unit) reboot driver

.../devicetree/bindings/power/reset/mtk-reboot.txt | 30 +++++
drivers/power/reset/Kconfig | 11 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/mtk-reboot.c | 116 ++++++++++++++++++++
drivers/watchdog/mtk_wdt.c | 3 +
include/dt-bindings/soc/mediatek,boot-mode.h | 17 +++
6 files changed, 178 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/mtk-reboot.txt
create mode 100644 drivers/power/reset/mtk-reboot.c
create mode 100644 include/dt-bindings/soc/mediatek,boot-mode.h
 \ /
  Last update: 2019-11-26 06:35    [W:0.057 / U:12.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site