lkml.org 
[lkml]   [2019]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 5/6] pwm: sun4i: Add support to output source clock directly
Hello Clément,

On Sun, Nov 24, 2019 at 06:29:07PM +0100, Clément Péron wrote:
> From: Jernej Skrabec <jernej.skrabec@siol.net>
>
> PWM core has an option to bypass whole logic and output unchanged source
> clock as PWM output. This is achieved by enabling bypass bit.
>
> Note that when bypass is enabled, no other setting has any meaning, not
> even enable bit.
>
> This mode of operation is needed to achieve high enough frequency to
> serve as clock source for AC200 chip which is integrated into same
> package as H6 SoC.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>

This looks fine now,

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Thanks
Uwe

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |

\
 
 \ /
  Last update: 2019-11-24 20:18    [W:0.113 / U:21.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site