lkml.org 
[lkml]   [2019]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/5] Add required-opps support to devfreq passive gov
From
Date
Dear Saravana,

Any other progress of this series?

Regards,
Chanwoo Choi

On 7/24/19 10:42 AM, Saravana Kannan wrote:
> The devfreq passive governor scales the frequency of a "child" device based
> on the current frequency of a "parent" device (not parent/child in the
> sense of device hierarchy). As of today, the passive governor requires one
> of the following to work correctly:
> 1. The parent and child device have the same number of frequencies
> 2. The child device driver passes a mapping function to translate from
> parent frequency to child frequency.
>
> When (1) is not true, (2) is the only option right now. But often times,
> all that is required is a simple mapping from parent's frequency to child's
> frequency.
>
> Since OPPs already support pointing to other "required-opps", add support
> for using that to map from parent device frequency to child device
> frequency. That way, every child device driver doesn't have to implement a
> separate mapping function anytime (1) isn't true.
>
> Some common (but not comprehensive) reason for needing a devfreq passive
> governor to adjust the frequency of one device based on another are:
>
> 1. These were the combination of frequencies that were validated/screened
> during the manufacturing process.
> 2. These are the sensible performance combinations between two devices
> interacting with each other. So that when one runs fast the other
> doesn't become the bottleneck.
> 3. Hardware bugs requiring some kind of frequency ratio between devices.
>
> For example, the following mapping can't be captured in DT as it stands
> today because the parent and child device have different number of OPPs.
> But with this patch series, this mapping can be captured cleanly.
>
> In arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi you have something
> like this with the following changes:
>
> bus_g2d_400: bus0 {
> compatible = "samsung,exynos-bus";
> clocks = <&cmu_top CLK_ACLK_G2D_400>;
> clock-names = "bus";
> operating-points-v2 = <&bus_g2d_400_opp_table>;
> status = "disabled";
> };
>
> bus_noc2: bus9 {
> compatible = "samsung,exynos-bus";
> clocks = <&cmu_mif CLK_ACLK_BUS2_400>;
> clock-names = "bus";
> operating-points-v2 = <&bus_noc2_opp_table>;
> status = "disabled";
> };
>
> bus_g2d_400_opp_table: opp_table2 {
> compatible = "operating-points-v2";
> opp-shared;
>
> opp-400000000 {
> opp-hz = /bits/ 64 <400000000>;
> opp-microvolt = <1075000>;
> required-opps = <&noc2_400>;
> };
> opp-267000000 {
> opp-hz = /bits/ 64 <267000000>;
> opp-microvolt = <1000000>;
> required-opps = <&noc2_200>;
> };
> opp-200000000 {
> opp-hz = /bits/ 64 <200000000>;
> opp-microvolt = <975000>;
> required-opps = <&noc2_200>;
> };
> opp-160000000 {
> opp-hz = /bits/ 64 <160000000>;
> opp-microvolt = <962500>;
> required-opps = <&noc2_134>;
> };
> opp-134000000 {
> opp-hz = /bits/ 64 <134000000>;
> opp-microvolt = <950000>;
> required-opps = <&noc2_134>;
> };
> opp-100000000 {
> opp-hz = /bits/ 64 <100000000>;
> opp-microvolt = <937500>;
> required-opps = <&noc2_100>;
> };
> };
>
> bus_noc2_opp_table: opp_table6 {
> compatible = "operating-points-v2";
>
> noc2_400: opp-400000000 {
> opp-hz = /bits/ 64 <400000000>;
> };
> noc2_200: opp-200000000 {
> opp-hz = /bits/ 64 <200000000>;
> };
> noc2_134: opp-134000000 {
> opp-hz = /bits/ 64 <134000000>;
> };
> noc2_100: opp-100000000 {
> opp-hz = /bits/ 64 <100000000>;
> };
> };
>
> -Saravana
>
> v3 -> v4:
> - Fixed documentation comments
> - Fixed order of functions in .h file
> - Renamed the new xlate API
> - Caused _set_required_opps() to fail if all required opps tables aren't
> linked.
> v2 -> v3:
> - Rebased onto linux-next.
> - Added documentation comment for new fields.
> - Added support for lazy required-opps linking.
> - Updated Ack/Reviewed-bys.
> v1 -> v2:
> - Cached OPP table reference in devfreq to avoid looking up every time.
> - Renamed variable in passive governor to be more intuitive.
> - Updated cover letter with examples.
>
>
> Saravana Kannan (5):
> OPP: Allow required-opps even if the device doesn't have power-domains
> OPP: Add function to look up required OPP's for a given OPP
> OPP: Improve required-opps linking
> PM / devfreq: Cache OPP table reference in devfreq
> PM / devfreq: Add required OPPs support to passive governor
>
> drivers/devfreq/devfreq.c | 6 ++
> drivers/devfreq/governor_passive.c | 20 ++++--
> drivers/opp/core.c | 83 +++++++++++++++++++---
> drivers/opp/of.c | 108 ++++++++++++++---------------
> drivers/opp/opp.h | 5 ++
> include/linux/devfreq.h | 2 +
> include/linux/pm_opp.h | 11 +++
> 7 files changed, 165 insertions(+), 70 deletions(-)
>

\
 
 \ /
  Last update: 2019-11-14 08:49    [W:0.123 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site