lkml.org 
[lkml]   [2019]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] ARM: dts: exynos5420: add mali dt node and enable mali on Odroid XU3/4
Date
Add device tree node for Mali GPU for Exynos 542x SoC.
GPU is disabled by default, and is enabled for each board after the
regulator is defined. Tested on Odroid-XU4.

Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
---

Changes since v4:
- fixed so it applies for latest 5.4-rc7

Changes since v3:
- fixed compatible to match bindings

Changes since v2:
- separate patch for bindings
- fixed bindings typo

Changes since v1:
- used generic node and label for GPU
- added bindings for compatible
- fixed irq indentation
- fixed interrupt-names to match bindings
- added cooling cells for future TMU connection
- used generic node and label for GPU opp table
- removed always-on from SoC GPU regulator

---
arch/arm/boot/dts/exynos5420.dtsi | 50 +++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 6 +++-
2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 7d51e0f4ab79..9f30f7535c40 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -670,6 +670,56 @@
iommus = <&sysmmu_gscl1>;
};

+ gpu: gpu@11800000 {
+ compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+ reg = <0x11800000 0x5000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+
+ clocks = <&clock CLK_G3D>;
+ clock-names = "core";
+ power-domains = <&g3d_pd>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ status = "disabled";
+ #cooling-cells = <2>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp@177000000 {
+ opp-hz = /bits/ 64 <177000000>;
+ opp-microvolt = <812500>;
+ };
+ opp@266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-microvolt = <862500>;
+ };
+ opp@350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <912500>;
+ };
+ opp-420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <962500>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-543000000 {
+ opp-hz = /bits/ 64 <543000000>;
+ opp-microvolt = <1037500>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+ };
+
scaler_0: scaler@12800000 {
compatible = "samsung,exynos5420-scaler";
reg = <0x12800000 0x1294>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 829147e320e0..f880aeccbace 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -522,7 +522,6 @@
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
- regulator-always-on;
regulator-boot-on;

regulator-state-mem {
@@ -654,6 +653,11 @@
vtmu-supply = <&ldo7_reg>;
};

+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
--
2.14.1
\
 
 \ /
  Last update: 2019-11-14 01:09    [W:0.070 / U:4.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site