lkml.org 
[lkml]   [2019]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv7 2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard
On 19-11-12 20:17, Fabio Estevam wrote:
> Hi Oliver,
>
> On Tue, Nov 12, 2019 at 4:22 PM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> > +&lcdif {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_lcdif>;
> > + display = <&display0>;
> > + status = "okay";
> > +
> > + display0: display0 {
> > + bits-per-pixel = <16>;
> > + bus-width = <24>;
> > +
> > + display-timings {
> > + native-mode = <&timing0>;
> > + timing0: timing0 {
> > + clock-frequency =<35000000>;
> > + hactive = <800>;
> > + vactive = <480>;
> > + hfront-porch = <40>;
> > + hback-porch = <40>;
> > + hsync-len = <48>;
> > + vback-porch = <29>;
> > + vfront-porch = <13>;
> > + vsync-len = <3>;
> > + hsync-active = <0>;
> > + vsync-active = <0>;
> > + de-active = <1>;
> > + pixelclk-active = <0>;
> > + };
> > + };
> > + };
> > +};
>
> You are using the deprecated bindings.
>
> Please switch to the DRM bindings as stated at
> Documentation/devicetree/bindings/display/mxsfb.txt
>
> You should also add your panel to the simple panel driver.

That would be the best solution :)

Regards,
Marco

\
 
 \ /
  Last update: 2019-11-13 08:41    [W:0.125 / U:29.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site