[lkml]   [2019]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2] ath10k: Fix qmi init error handling
When ath10k_qmi_init() fails, the error handling does not free the irq
resources, which causes an issue if we EPROBE_DEFER as we'll attempt to
(re-)register irqs which are already registered.

Fix this by doing a power off since we just powered on the hardware, and
freeing the irqs as error handling.

Fixes: ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Jeffrey Hugo <>

-Call power_off() as well

drivers/net/wireless/ath/ath10k/snoc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index cd22c8654aa9..50b3d443ad37 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1563,13 +1563,16 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
ret = ath10k_qmi_init(ar, msa_size);
if (ret) {
ath10k_warn(ar, "failed to register wlfw qmi client: %d\n", ret);
- goto err_core_destroy;
+ goto err_power_off;

ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc probe\n");

return 0;

+ ath10k_hw_power_off(ar);

 \ /
  Last update: 2019-11-13 16:40    [W:0.089 / U:3.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site