lkml.org 
[lkml]   [2019]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64
From
Date

> On 12 Nov 2019, at 14:46, Vasily Khoruzhick <anarsoul@gmail.com> wrote:
>
> On Tue, Nov 12, 2019 at 10:34 AM Katsuhiro Suzuki
> <katsuhiro@katsuster.net> wrote:
>>
>> On 2019/11/12 14:49, Vasily Khoruzhick wrote:
>>> On Mon, Nov 11, 2019 at 9:43 PM Vasily Khoruzhick <anarsoul@gmail.com> wrote:
>>>>
>>>> On Mon, Nov 11, 2019 at 9:34 PM Katsuhiro Suzuki
>>>> <katsuhiro@katsuster.net> wrote:
>>>>>
>>>>> Hello Vasily,
>>>>>
>>>>> Thank you for valuable information.
>>>>>
>>>>> On 2019/11/12 4:25, Vasily Khoruzhick wrote:
>>>>>> On Sun, Nov 10, 2019 at 9:40 PM Vasily Khoruzhick <anarsoul@gmail.com> wrote:
>>>>>>>
>>>>>>> On Sun, Nov 10, 2019 at 7:30 PM Katsuhiro Suzuki
>>>>>>> <katsuhiro@katsuster.net> wrote:
>>>>>>>>
>>>>>>>> Hello Vasily,
>>>>>>>
>>>>>>> Hi Katsuhiro,
>>>>>>>
>>>>>>> Thanks for response!
>>>>>>
>>>>>> Looks like on my board codec sits at address 0x10, and according to
>>>>>> schematics that's what its address is supposed to be.
>>>>>>
>>>>>> See http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
>>>>>>
>>>>>> Codec address is selected by pin CE of ES8316, and on rockpro64 it
>>>>>> goes to GND through R226. So address should be 0x10.
>>>>>>
>>>>>
>>>>> Yes, I agree. The schematics both v2.0 and v2.1 say that ES8316
>>>>> address is 0x10. Thank you for pointing.
>>>>>
>>>>> But I wonder that my RockPro64 behavior is strange, he is in address
>>>>> 0x11. (R226 on my board is broken...??)
>>>>>
>>>>> root@rockpro64:~# i2cdetect 1
>>>>> WARNING! This program can confuse your I2C bus, cause data loss and worse!
>>>>> I will probe file /dev/i2c-1.
>>>>> I will probe address range 0x03-0x77.
>>>>> Continue? [Y/n] y
>>>>> 0 1 2 3 4 5 6 7 8 9 a b c d e f
>>>>> 00: -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 10: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>>>> 70: -- -- -- -- -- -- -- --
>>>>>
>>>>> I plan to check R226 resistance value to judge R226 is broken or not
>>>>> after return to home. And share the result with you.
>>>>> Please give me a time.
>>>>
>>>> Thanks for confirming that on your board it's on address 0x11. I
>>>> checked with some other rockpro64 owners and they have it on 0x10, but
>>>> looks like we have boards with codec on different address in the wild.
>>>
>>> Another datapoint is that my board is 2.0. If yours is 2.1 it can be a
>>> difference between 2.0 and 2.1.
>>>
>>
>> I'm using v2.1 board.
>>
>>
>> I'll share the checking result. It's a little strange.
>>
>> 1) Voltage of CE pin of ES8316
>>
>> It is 1.8V when booting linux-next kernel.
>>
>>
>> 2) My board
>>
>> I can't find no crack nor broken parts on my board.
>>
>>
>> 2) R225, R226
>>
>> As you know, RockPro64 board has no silk print so we cannot know
>> perfectly which resistance is R226. So this is my assumption.
>>
>> PCIe, SD card slot
>> (top)
>> LAN (left)ES8316(right) USB, reset button
>>
>> On the left space of ES8316 there is no resistance, only a pattern.
>> This is maybe R225. And 10K resistance on the right side of a
>> pattern. I assume this is R226.
>>
>> If my assumption is correctly, board implementation and schematics
>> are different.
>>
>> schematics of v2.1 gets something wrong...??
>
> Guess we need few more RockPro64 v2.1 owners to confirm that it's
> indeed the case.

I also have a RockPro64 board v2.1, and my ES8316 codec is at address 0x11.
I'm using a kernel with Katsuhiro's patch and I can use alsamixer and play
sounds out of the analog jack. My i2cdetect output:

root@kodi64:~# i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- —

Regards,
Hugh

>
>>
>>>>> Best Regards,
>>>>> Katsuhiro Suzuki
>>>>>
>>>>>
>>>>>>>> Thank you for reporting.
>>>>>>>>
>>>>>>>> On 2019/11/11 9:17, Vasily Khoruzhick wrote:
>>>>>>>>> On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
>>>>>>>>> <katsuhiro@katsuster.net> wrote:
>>>>>>>>>>
>>>>>>>>>> This patch adds audio codec (Everest ES8316) and I2S audio nodes for
>>>>>>>>>> RK3399 RockPro64.
>>>>>>>>>
>>>>>>>>> Hi Katsuhiro,
>>>>>>>>>
>>>>>>>>> I tested your patch with my rockpro64 on 5.4-rc6 which has your other
>>>>>>>>> patches to es8316 driver, but apparently it doesn't work.
>>>>>>>>>
>>>>>>>>> 'alsamixer' complains 'cannot load mixer controls: No such device or
>>>>>>>>> address' and if I try to play audio with mpg123 it pretends that it
>>>>>>>>> plays something but there's no sound.
>>>>>>>>>
>>>>>>>>> Any idea what can be wrong?
>>>>>>>>>
>>>>>>>>
>>>>>>>> Do you use defconfig? If so I guess we need turn on more configs:
>>>>>>>>
>>>>>>>> - simple-graph-card driver (CONFIG_SND_AUDIO_GRAPH_CARD)
>>>>>>>> - ES8316 (SND_SOC_ES8316)
>>>>>>>
>>>>>>> I have these enabled, card is present in /proc/asound/cards, but
>>>>>>> alsamixer doesn't work with it.
>>>>>>>
>>>>>>>> FYI) ASoC related status or logs in my environment as follows:
>>>>>>>>
>>>>>>>> root@rockpro64:~# uname -a
>>>>>>>> Linux rockpro64 5.4.0-rc6-next-20191108 #169 SMP PREEMPT Mon Nov 11 12:21:44 JST 2019 aarch64 GNU/Linux
>>>>>>>
>>>>>>> I'm running 5.4.0-rc6 (commit
>>>>>>> 00aff6836241ae5654895dcea10e6d4fc5878ca6) with your patch "arm64: dts:
>>>>>>> rockchip: add analog audio nodes on rk3399-rockpro64" on top of it.
>>>>>>>
>>>>>>>> root@rockpro64:~# dmesg | grep -i asoc
>>>>>>>> [ 21.509903] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
>>>>>>>> [ 21.510550] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
>>>>>>>> [ 21.567906] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mapping ok
>>>>>>>> [ 21.568565] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
>>>>>>>
>>>>>>> Similar here:
>>>>>>>
>>>>>>> [vasilykh@rockpro64 ~]$ dmesg | grep -i asoc
>>>>>>> [ 15.627685] asoc-audio-graph-card sound: ES8316 HiFi <->
>>>>>>> ff890000.i2s mapping ok
>>>>>>> [ 16.250196] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
>>>>>>>
>>>>>>>> root@rockpro64:~# cat /proc/asound/pcm
>>>>>>>> 00-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi i2s-hifi-0 : playback 1
>>>>>>>> 01-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : playback 1 : capture 1
>>>>>>>
>>>>>>> Same here:
>>>>>>>
>>>>>>> [vasilykh@rockpro64 ~]$ cat /proc/asound/pcm
>>>>>>> 00-00: ff890000.i2s-ES8316 HiFi ES8316 HiFi-0 : ff890000.i2s-ES8316
>>>>>>> HiFi ES8316 HiFi-0 : playback 1 : capture 1
>>>>>>> 01-00: ff8a0000.i2s-i2s-hifi i2s-hifi-0 : ff8a0000.i2s-i2s-hifi
>>>>>>> i2s-hifi-0 : playback
>>>>>>>
>>>>>>>> root@rockpro64:~# cat /sys/kernel/debug/asoc/components
>>>>>>>> hdmi-audio-codec.3.auto
>>>>>>>> ff8a0000.i2s
>>>>>>>> ff8a0000.i2s
>>>>>>>> ff890000.i2s
>>>>>>>> ff890000.i2s
>>>>>>>> ff880000.i2s
>>>>>>>> ff880000.i2s
>>>>>>>> es8316.1-0011
>>>>>>>> snd-soc-dummy
>>>>>>>> snd-soc-dummy
>>>>>>>
>>>>>>> Same here.
>>>>>>>
>>>>>>>> root@rockpro64:~# cat /sys/kernel/debug/asoc/dais
>>>>>>>> i2s-hifi
>>>>>>>> ff8a0000.i2s
>>>>>>>> ff890000.i2s
>>>>>>>> ff880000.i2s
>>>>>>>> ES8316 HiFi
>>>>>>>> snd-soc-dummy-dai
>>>>>>>
>>>>>>> Same here.
>>>>>>>
>>>>>>> Yet alsamixer doesn't work for me. It terminates with 'cannot load
>>>>>>> mixer controls: No such device or address'. Strace shows that fails
>>>>>>> here:
>>>>>>>
>>>>>>> openat(AT_FDCWD, "/dev/snd/controlC0", O_RDWR|O_CLOEXEC) = 3
>>>>>>> fcntl(3, F_SETFD, FD_CLOEXEC) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_PVERSION, 0xfffffd3ad04c) = 0
>>>>>>> fcntl(3, F_GETFL) = 0x20002 (flags O_RDWR|O_LARGEFILE)
>>>>>>> fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK|O_LARGEFILE) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_LIST, 0xfffffd3ad228) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_INFO, 0xfffffd3ace38) = 0
>>>>>>> ioctl(3, SNDRV_CTL_IOCTL_ELEM_READ, 0xfffffd3ac160) = -1 ENXIO (No
>>>>>>> such device or address)
>>>>>>>
>>>>>>> Looks like it fails to talk to the codec?
>>>>>>>
>>>>>>> mpg123 thinks that it's playing audio, but my headphones connected to
>>>>>>> 3.5mm output are silent.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Vasily
>>>>>>>
>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> Katsuhiro Suzuki
>>>>>>>>
>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Vasily
>>>>>>>>>
>>>>>>>>>> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
>>>>>>>>>> ---
>>>>>>>>>> .../boot/dts/rockchip/rk3399-rockpro64.dts | 28 +++++++++++++++++++
>>>>>>>>>> 1 file changed, 28 insertions(+)
>>>>>>>>>>
>>>>>>>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>>>>> index 0401d4ec1f45..8b1e6382b140 100644
>>>>>>>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>>>>> @@ -81,6 +81,12 @@
>>>>>>>>>> reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>> + sound {
>>>>>>>>>> + compatible = "audio-graph-card";
>>>>>>>>>> + label = "rockchip,rk3399";
>>>>>>>>>> + dais = <&i2s1_p0>;
>>>>>>>>>> + };
>>>>>>>>>> +
>>>>>>>>>> vcc12v_dcin: vcc12v-dcin {
>>>>>>>>>> compatible = "regulator-fixed";
>>>>>>>>>> regulator-name = "vcc12v_dcin";
>>>>>>>>>> @@ -470,6 +476,20 @@
>>>>>>>>>> i2c-scl-rising-time-ns = <300>;
>>>>>>>>>> i2c-scl-falling-time-ns = <15>;
>>>>>>>>>> status = "okay";
>>>>>>>>>> +
>>>>>>>>>> + es8316: codec@11 {
>>>>>>>>>> + compatible = "everest,es8316";
>>>>>>>>>> + reg = <0x11>;
>>>>>>>>>> + clocks = <&cru SCLK_I2S_8CH_OUT>;
>>>>>>>>>> + clock-names = "mclk";
>>>>>>>>>> + #sound-dai-cells = <0>;
>>>>>>>>>> +
>>>>>>>>>> + port {
>>>>>>>>>> + es8316_p0_0: endpoint {
>>>>>>>>>> + remote-endpoint = <&i2s1_p0_0>;
>>>>>>>>>> + };
>>>>>>>>>> + };
>>>>>>>>>> + };
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>> &i2c3 {
>>>>>>>>>> @@ -505,6 +525,14 @@
>>>>>>>>>> rockchip,playback-channels = <2>;
>>>>>>>>>> rockchip,capture-channels = <2>;
>>>>>>>>>> status = "okay";
>>>>>>>>>> +
>>>>>>>>>> + i2s1_p0: port {
>>>>>>>>>> + i2s1_p0_0: endpoint {
>>>>>>>>>> + dai-format = "i2s";
>>>>>>>>>> + mclk-fs = <256>;
>>>>>>>>>> + remote-endpoint = <&es8316_p0_0>;
>>>>>>>>>> + };
>>>>>>>>>> + };
>>>>>>>>>> };
>>>>>>>>>>
>>>>>>>>>> &i2s2 {
>>>>>>>>>> --
>>>>>>>>>> 2.23.0.rc1
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> linux-arm-kernel mailing list
>>>>>>>>>> linux-arm-kernel@lists.infradead.org
>>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>
>>>
>>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

\
 
 \ /
  Last update: 2019-11-13 16:02    [W:0.094 / U:4.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site