lkml.org 
[lkml]   [2019]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: console output duplicated when registering additional consoles
Adding printk maintainers.
This commit seems to have introduced the error:

commit f92b070f2dc89a8ff1a0cc8b608e20abef894c7d
Author: Petr Mladek <pmladek@suse.com>
Date: Thu Sep 13 14:34:06 2018 +0200

printk: Do not miss new messages when replaying the log

If I checkout to the commit before
(a06b0c82a049d34d4dc273e8692ed0894458c468), the console output is
normal when registering 2 bootconsoles and 2 normal consoles. I've
added the log for 4.19.0-rc3 for comparison (previous version was
5.1.0). I don't think this commit took into account that more than one
console could be registered. When the second console is registered,
'console_seq >= exclusive_console_stop_seq' is true (both are 0) and
exclusive_console is always set to NULL resulting in the log being
replayed again to the uart8250 console:

/* Output to all consoles once old messages replayed. */
if (unlikely(exclusive_console &&
console_seq >= exclusive_console_stop_seq)) {
exclusive_console = NULL;
}

I'm looking into it but any input is helpful. Thanks.

On Wed, Nov 6, 2019 at 5:09 PM Jonathan Richardson
<jonathan.richardson@broadcom.com> wrote:
>
> Hi,
>
> I have a console driver that registers an additional boot console and
> "normal" console. The command line is:
> earlycon=uart8250,mmio32,0x68A10000 console=ttyS0,115200n8
> earlylog=0x8f110000,0x10000
>
> When the second bootconsole is registered via register_console(), the
> output in the log buffer is written a second time to the uart8250
> console resulting in duplicate output. When the second "normal"
> console is registered the complete buffer is written again to
> uart8250. It looks like a bug in printk but I'm still trying to figure
> out how it's keeping track of what has been written to a console.
>
> I've attached the driver and uart8250 output.
>
> Thanks.
--- STARTING KERNEL
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 4.19.0-rc3 (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP Wed Nov 13 19:14:49 UTC 2019
[ 0.000000] Machine model: Stingray Combo SVK w/PAXB IOMMU (BCM958742K)
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000068a10000 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] bootconsole [earlycon_log0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS=0x85c90000 SMBIOS 3.0=0x85a20000 ACPI 2.0=0x85d50000 MEMATTR=0x893af018
[ 0.000000] crashkernel reserved: 0x00000000dfe00000 - 0x00000000ffe00000 (512 MB)
[ 0.000000] cma: Reserved 1024 MiB at 0x000000009fc00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x3fc with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53784 r8192 d32232 u94208
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for EL2 vector hardening
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 12376560
[ 0.000000] Kernel command line: FS2:\Image.2 root=/dev/mmcblk0p4 rw rootwait earlycon=uart8250,mmio32,0x68A10000 earlylog=0x8f110000,0x10000 console=ttyS0,115200n8 hugepages=0 cma=1G crashkernel=512M pci=pcie_bus_safe pciehp.pciehp_poll_mode=1 pciehp.pciehp_poll_time=5 vfio_pci.disable_idle_d3=1 pcie_ports=native maxcpus=8 bgmac_platform.ethaddr=00:0A:F7:95:62:82 ip=10.136.13.31:10.136.4.151:10.136.13.1:255.255.255.0:::off loglevel=7
[ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x9bc00000-0x9fc00000] (64MB)
[ 0.000000] Memory: 47740792K/50292608K available (9148K kernel code, 804K rwdata, 3260K rodata, 768K init, 347K bss, 1503240K reserved, 1048576K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] ITS [mem 0x63c20000-0x63c2ffff]
[ 0.000000] ITS@0x0000000063c20000: allocated 65536 Devices @a3c9480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000a3c9450000
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000063e00000
[ 0.000000] CPU0: using LPI pending table @0x000000a3c9460000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] arch_timer: cp15 timer(s) running at 125.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x39a85c4118, max_idle_ns: 881590405314 ns
[ 0.000001] sched_clock: 56 bits at 125MHz, resolution 8ns, wraps every 4398046511100ns
[ 0.009162] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900835740 ns
[ 0.020098] Console: colour dummy device 80x25
[ 0.025146] bootconsole [earlycon_log0] disabled
[ 0.031519] console [console_log0] enabled
[ 0.036178] Calibrating delay loop (skipped), value calculated using timer frequency.. 250.00 BogoMIPS (lpj=500000)
[ 0.048044] pid_max: default: 32768 minimum: 301
[ 0.053305] Security Framework initialized
[ 0.058116] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.066311] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.075186] ASID allocator initialised with 32768 entries
[ 0.081343] rcu: Hierarchical SRCU implementation.
[ 0.087216] Platform MSI: gic-its@63c20000 domain created
[ 0.093385] PCI/MSI: /scr/interrupt-controller@2c00000/gic-its@63c20000 domain created
[ 0.102432] Remapping and enabling EFI services.
[ 0.108047] smp: Bringing up secondary CPUs ...
I: Cluster #1 entering to snoop/dvm domain
I: Cluster #2 entering to snoop/dvm domain
I: Cluster #3 entering to snoop/dvm domain
[ 0.113354] Detected PIPT I-cache on CPU1
[ 0.113367] GICv3: CPU1: found redistributor 1 region 0:0x0000000063e20000
[ 0.113398] CPU1: using LPI pending table @0x000000a3c97c0000
[ 0.113410] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.113825] Detected PIPT I-cache on CPU2
[ 0.113837] GICv3: CPU2: found redistributor 100 region 0:0x0000000063e40000
[ 0.113870] CPU2: using LPI pending table @0x000000a3c8c00000
[ 0.113884] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.114066] Detected PIPT I-cache on CPU3
[ 0.114072] GICv3: CPU3: found redistributor 101 region 0:0x0000000063e60000
[ 0.114103] CPU3: using LPI pending table @0x000000a3c8c30000
[ 0.114112] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.115848] Detected PIPT I-cache on CPU4
[ 0.115858] GICv3: CPU4: found redistributor 200 region 0:0x0000000063e80000
[ 0.115889] CPU4: using LPI pending table @0x000000a3c8c40000
[ 0.115903] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
[ 0.116083] Detected PIPT I-cache on CPU5
[ 0.116090] GICv3: CPU5: found redistributor 201 region 0:0x0000000063ea0000
[ 0.116118] CPU5: using LPI pending table @0x000000a3c8c90000
[ 0.116128] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
[ 0.119791] Detected PIPT I-cache on CPU6
[ 0.119801] GICv3: CPU6: found redistributor 300 region 0:0x0000000063ec0000
[ 0.119832] CPU6: using LPI pending table @0x000000a3c8cb0000
[ 0.119845] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
[ 0.120026] Detected PIPT I-cache on CPU7
[ 0.120032] GICv3: CPU7: found redistributor 301 region 0:0x0000000063ee0000
[ 0.120061] CPU7: using LPI pending table @0x000000a3c8d00000
[ 0.120070] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
[ 0.120097] smp: Brought up 1 node, 8 CPUs
[ 0.315513] SMP: Total of 8 processors activated.
[ 0.320856] CPU features: detected: GIC system register CPU interface
[ 0.328173] CPU features: detected: 32-bit EL0 Support
[ 0.382220] CPU: All CPU(s) started at EL2
[ 0.386887] alternatives: patching kernel code
[ 0.392239] devtmpfs: initialized
[ 0.397661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.408742] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.422196] xor: measuring software checksum speed
[ 0.467666] 8regs : 9089.000 MB/sec
[ 0.512428] 8regs_prefetch: 8244.000 MB/sec
[ 0.557584] 32regs : 9430.000 MB/sec
[ 0.602344] 32regs_prefetch: 8531.000 MB/sec
[ 0.607586] xor: using function: 32regs (9430.000 MB/sec)
[ 0.613722] pinctrl core: initialized pinctrl subsystem
[ 0.619993] SMBIOS 3.3.0 present.
[ 0.623759] DMI: BRCM BRCM-SR/BRCM-SR, BIOS 0.1 Nov 4 2019
[ 0.630176] NET: Registered protocol family 16
[ 0.635383] audit: initializing netlink subsys (disabled)
[ 0.641561] audit: type=2000 audit(0.424:1): state=initialized audit_enabled=0 res=1
[ 0.650375] cpuidle: using governor menu
[ 0.654901] WARNING: CPU: 0 PID: 1 at /usr/src/kernel/arch/arm64/kernel/setup.c:271 reserve_memblock_reserved_regions+0xd8/0x144
[ 0.668049] Modules linked in:
[ 0.671513] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc3 #1
[ 0.678631] Hardware name: BRCM BRCM-SR/BRCM-SR, BIOS 0.1 Nov 4 2019
[ 0.685948] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 0.691386] pc : reserve_memblock_reserved_regions+0xd8/0x144
[ 0.697911] lr : reserve_memblock_reserved_regions+0xd0/0x144
[ 0.704437] sp : ffff00000805bd40
[ 0.708194] x29: ffff00000805bd40 x28: 0000000000000004
[ 0.714227] x27: ffff000008d51050 x26: ffff000008cb0630
[ 0.720259] x25: 0000000000000000 x24: 0000000000488020
[ 0.726291] x23: 000000008f13ffff x22: ffff000008c50fa0
[ 0.732323] x21: ffff000008ba6258 x20: ffff000008d78000
[ 0.738355] x19: ffff80a34887cf00 x18: ffffffffffffffff
[ 0.744386] x17: 0000000000000000 x16: 0000000000000000
[ 0.750418] x15: ffff000008d78688 x14: ffff000008d786d0
[ 0.756451] x13: 0000000000000000 x12: 0000000000000038
[ 0.762483] x11: 0101010101010101 x10: ffff80a34887cf00
[ 0.768514] x9 : 0000000000000000 x8 : ffff80a34887cf80
[ 0.774546] x7 : 0000000000000000 x6 : 000000008f220000
[ 0.780578] x5 : ffff80007ffffc30 x4 : ffff80007ffffbc0
[ 0.786610] x3 : 000000008f13ffff x2 : ffff000008e3f180
[ 0.792642] x1 : 0000000000000000 x0 : 0000000000000000
[ 0.798674] Call trace:
[ 0.801444] reserve_memblock_reserved_regions+0xd8/0x144
[ 0.807576] do_one_initcall+0x5c/0x180
[ 0.811928] kernel_init_freeable+0x1c0/0x26c
[ 0.816874] kernel_init+0x10/0x108
[ 0.820830] ret_from_fork+0x10/0x1c
[ 0.824885] ---[ end trace 698bac369de9cb4e ]---
[ 0.830142] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.838549] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.846578] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.858611] gpiochip_add_data_with_key: GPIOs 355..505 (689d0000.gpio) failed to register, -517
[ 0.868505] iproc-gpio 689d0000.gpio: unable to add GPIO chip
[ 0.881679] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.889417] cryptd: max_cpu_qlen set to 1000
[ 0.962323] raid6: int64x1 gen() 1702 MB/s
[ 1.035203] raid6: int64x1 xor() 1715 MB/s
[ 1.108080] raid6: int64x2 gen() 2349 MB/s
[ 1.180957] raid6: int64x2 xor() 2413 MB/s
[ 1.253838] raid6: int64x4 gen() 3268 MB/s
[ 1.326718] raid6: int64x4 xor() 2583 MB/s
[ 1.399595] raid6: int64x8 gen() 3266 MB/s
[ 1.472483] raid6: int64x8 xor() 2516 MB/s
[ 1.545363] raid6: neonx1 gen() 3476 MB/s
[ 1.618240] raid6: neonx1 xor() 4027 MB/s
[ 1.691123] raid6: neonx2 gen() 4472 MB/s
[ 1.764001] raid6: neonx2 xor() 4978 MB/s
[ 1.836875] raid6: neonx4 gen() 6345 MB/s
[ 1.909752] raid6: neonx4 xor() 5174 MB/s
[ 1.982627] raid6: neonx8 gen() 6801 MB/s
[ 2.055503] raid6: neonx8 xor() 6024 MB/s
[ 2.060349] raid6: using algorithm neonx8 gen() 6801 MB/s
[ 2.066481] raid6: .... xor() 6024 MB/s, rmw enabled
[ 2.072118] raid6: using neon recovery algorithm
[ 2.077628] vgaarb: loaded
[ 2.080780] SCSI subsystem initialized
[ 2.085113] ssp-pl022 68a80000.spi: ARM PL022 driver, device ID: 0x00241022
[ 2.093058] ssp-pl022 68a90000.spi: ARM PL022 driver, device ID: 0x00241022
[ 2.101034] usbcore: registered new interface driver usbfs
[ 2.107277] usbcore: registered new interface driver hub
[ 2.113336] usbcore: registered new device driver usb
[ 2.119094] pps_core: LinuxPPS API ver. 1 registered
[ 2.124740] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.135128] PTP clock support registered
[ 2.139628] EDAC MC: Ver: 3.0.0
[ 2.143270] Registered efivars operations
[ 2.148074] clocksource: Switched to clocksource arch_sys_counter
[ 2.155045] VFS: Disk quotas dquot_6.6.0
[ 2.159513] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.169074] NET: Registered protocol family 2
[ 2.174156] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes)
[ 2.183470] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.193033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.200924] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.208488] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 2.216009] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 2.224054] NET: Registered protocol family 1
[ 2.229109] RPC: Registered named UNIX socket transport module.
[ 2.235840] RPC: Registered udp transport module.
[ 2.241184] RPC: Registered tcp transport module.
[ 2.246526] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.254177] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 2.263136] kvm [1]: 8-bit VMID
[ 2.266865] kvm [1]: GICv3: no GICV resource entry
[ 2.272308] kvm [1]: disabling GICv2 emulation
[ 2.277365] kvm [1]: GIC system register CPU interface enabled
[ 2.284048] kvm [1]: vgic interrupt IRQ1
[ 2.288569] kvm [1]: Hyp mode initialized successfully
[ 2.298883] workingset: timestamp_bits=46 max_order=24 bucket_order=0
[ 2.308038] NFS: Registering the id_resolver key type
[ 2.313784] Key type id_resolver registered
[ 2.318533] Key type id_legacy registered
[ 2.323087] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.330739] 9p: Installing v9fs 9p2000 file system support
[ 2.343370] NET: Registered protocol family 38
[ 2.348427] async_tx: api initialized (async)
[ 2.353386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.361795] io scheduler noop registered
[ 2.366248] io scheduler deadline registered
[ 2.371122] io scheduler cfq registered (default)
[ 2.376466] io scheduler mq-deadline registered
[ 2.381610] io scheduler kyber registered
[ 2.386360] brcm-sata-phy 67d02100.sata_phy: registered 1 port(s)
[ 2.393329] brcm-sata-phy 67d12100.sata_phy: registered 1 port(s)
[ 2.400300] brcm-sata-phy 67d22100.sata_phy: registered 1 port(s)
[ 2.407266] brcm-sata-phy 67d32100.sata_phy: registered 1 port(s)
[ 2.414235] brcm-sata-phy 67e02100.sata_phy: registered 1 port(s)
[ 2.421204] brcm-sata-phy 67e12100.sata_phy: registered 1 port(s)
[ 2.428170] brcm-sata-phy 67e22100.sata_phy: registered 1 port(s)
[ 2.435139] brcm-sata-phy 67e32100.sata_phy: registered 1 port(s)
[ 2.442256] sr-pcie-phy 40000000.phy: Stingray PCIe PHY driver initialized
[ 2.450181] pinctrl-single 68a40000.pinconf: please update dts to use #pinctrl-cells = <1>
[ 2.459642] pinctrl-single 68a40000.pinconf: 148 pins, size 592
[ 2.466402] pinctrl-single 68a4029c.pinmux: please update dts to use #pinctrl-cells = <1>
[ 2.475763] pinctrl-single 68a4029c.pinmux: 155 pins, size 620
[ 2.482582] iproc-pcie 48000000.pcie: host bridge /pcie@48000000 ranges:
[ 2.490206] iproc-pcie 48000000.pcie: MEM 0x400000000..0x46fffffff -> 0x400000000
[ 2.498912] iproc-pcie 48000000.pcie: MEM 0x470000000..0x47fffffff -> 0x40000000
[ 2.507521] iproc-pcie 48000000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 2.624106] iproc-pcie 48000000.pcie: link: UP
[ 2.629164] iproc-pcie 48000000.pcie: not using iProc MSI
[ 2.635326] iproc-pcie 48000000.pcie: PCI host bridge to bus 0000:00
[ 2.642551] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.648784] pci_bus 0000:00: root bus resource [mem 0x400000000-0x46fffffff pref]
[ 2.657292] pci_bus 0000:00: root bus resource [mem 0x470000000-0x47fffffff] (bus address [0x40000000-0x4fffffff])
[ 2.669084] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 2.680065] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 2.691088] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
[ 2.702814] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.711916] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 2.722996] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xc8 may corrupt adjacent RW1C bits
[ 2.734075] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 2.745157] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[ 2.756236] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xc8 may corrupt adjacent RW1C bits
[ 2.767314] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x6 may corrupt adjacent RW1C bits
[ 2.778438] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 2.789911] pci 0000:01:00.0: enabling Extended Tags
[ 2.796749] pci 0000:00:00.0: BAR 14: assigned [mem 0x470000000-0x4700fffff]
[ 2.804764] pci 0000:01:00.0: BAR 6: assigned [mem 0x470000000-0x47001ffff pref]
[ 2.813173] pci 0000:01:00.0: BAR 4: assigned [mem 0x470020000-0x47002ffff 64bit]
[ 2.821860] pci 0000:01:00.0: BAR 0: assigned [mem 0x470030000-0x470033fff 64bit]
[ 2.830488] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.836130] pci 0000:00:00.0: bridge window [mem 0x470000000-0x4700fffff]
[ 2.844051] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.853686] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.863331] iproc-pcie 48004000.pcie: host bridge /pcie@48004000 ranges:
[ 2.870953] iproc-pcie 48004000.pcie: MEM 0x480000000..0x4efffffff -> 0x480000000
[ 2.879658] iproc-pcie 48004000.pcie: MEM 0x4f0000000..0x4ffffffff -> 0x40000000
[ 2.888265] iproc-pcie 48004000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 2.899542] phy phy-40000000.phy.9: phy init failed --> -19
[ 2.905874] iproc-pcie 48004000.pcie: unable to initialize PCIe PHY
[ 2.912996] iproc-pcie 48004000.pcie: PCIe controller setup failed
[ 2.920040] iproc-pcie 48008000.pcie: host bridge /pcie@48008000 ranges:
[ 2.927661] iproc-pcie 48008000.pcie: MEM 0x500000000..0x56fffffff -> 0x500000000
[ 2.936366] iproc-pcie 48008000.pcie: MEM 0x570000000..0x57fffffff -> 0x40000000
[ 2.944972] iproc-pcie 48008000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 3.064104] iproc-pcie 48008000.pcie: link: UP
[ 3.069160] iproc-pcie 48008000.pcie: not using iProc MSI
[ 3.075316] iproc-pcie 48008000.pcie: PCI host bridge to bus 0002:00
[ 3.082540] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 3.088774] pci_bus 0002:00: root bus resource [mem 0x500000000-0x56fffffff pref]
[ 3.097282] pci_bus 0002:00: root bus resource [mem 0x570000000-0x57fffffff] (bus address [0x40000000-0x4fffffff])
[ 3.109713] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.119455] pci 0002:01:00.0: enabling Extended Tags
[ 3.125617] pci 0002:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 3.152680] pci 0002:00:00.0: BAR 14: assigned [mem 0x570000000-0x5700fffff]
[ 3.160696] pci 0002:01:00.0: BAR 6: assigned [mem 0x570000000-0x57001ffff pref]
[ 3.169106] pci 0002:01:00.0: BAR 4: assigned [mem 0x570020000-0x57002ffff 64bit]
[ 3.177791] pci 0002:01:00.0: BAR 0: assigned [mem 0x570030000-0x570033fff 64bit]
[ 3.186417] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 3.192058] pci 0002:00:00.0: bridge window [mem 0x570000000-0x5700fffff]
[ 3.199979] pci 0002:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 3.209606] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 3.219245] iproc-pcie 4800c000.pcie: host bridge /pcie@4800c000 ranges:
[ 3.226867] iproc-pcie 4800c000.pcie: MEM 0x580000000..0x5efffffff -> 0x580000000
[ 3.235572] iproc-pcie 4800c000.pcie: MEM 0x5f0000000..0x5ffffffff -> 0x40000000
[ 3.244179] iproc-pcie 4800c000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 3.360107] iproc-pcie 4800c000.pcie: PHY or data link is INACTIVE!
[ 3.367230] iproc-pcie 4800c000.pcie: no PCIe EP device detected
[ 3.374056] iproc-pcie 4800c000.pcie: PCIe controller setup failed
[ 3.381100] iproc-pcie 48010000.pcie: host bridge /pcie@48010000 ranges:
[ 3.388722] iproc-pcie 48010000.pcie: MEM 0x600000000..0x66fffffff -> 0x600000000
[ 3.397427] iproc-pcie 48010000.pcie: MEM 0x670000000..0x67fffffff -> 0x40000000
[ 3.406033] iproc-pcie 48010000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 3.417308] phy phy-40000000.phy.12: phy init failed --> -19
[ 3.423738] iproc-pcie 48010000.pcie: unable to initialize PCIe PHY
[ 3.430860] iproc-pcie 48010000.pcie: PCIe controller setup failed
[ 3.437900] iproc-pcie 48014000.pcie: host bridge /pcie@48014000 ranges:
[ 3.445521] iproc-pcie 48014000.pcie: MEM 0x680000000..0x6efffffff -> 0x680000000
[ 3.454226] iproc-pcie 48014000.pcie: MEM 0x6f0000000..0x6ffffffff -> 0x40000000
[ 3.462832] iproc-pcie 48014000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 3.474107] phy phy-40000000.phy.13: phy init failed --> -19
[ 3.480538] iproc-pcie 48014000.pcie: unable to initialize PCIe PHY
[ 3.487660] iproc-pcie 48014000.pcie: PCIe controller setup failed
[ 3.494699] iproc-pcie 48018000.pcie: host bridge /pcie@48018000 ranges:
[ 3.502320] iproc-pcie 48018000.pcie: MEM 0x700000000..0x76fffffff -> 0x700000000
[ 3.511025] iproc-pcie 48018000.pcie: MEM 0x770000000..0x77fffffff -> 0x40000000
[ 3.519631] iproc-pcie 48018000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 3.636100] iproc-pcie 48018000.pcie: link: UP
[ 3.641156] iproc-pcie 48018000.pcie: not using iProc MSI
[ 3.647310] iproc-pcie 48018000.pcie: PCI host bridge to bus 0006:00
[ 3.654534] pci_bus 0006:00: root bus resource [bus 00-ff]
[ 3.660768] pci_bus 0006:00: root bus resource [mem 0x700000000-0x76fffffff pref]
[ 3.669276] pci_bus 0006:00: root bus resource [mem 0x770000000-0x77fffffff] (bus address [0x40000000-0x4fffffff])
[ 3.681707] pci 0006:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.691451] pci 0006:01:00.0: enabling Extended Tags
[ 3.698277] pci 0006:00:00.0: BAR 14: assigned [mem 0x770000000-0x7700fffff]
[ 3.706292] pci 0006:01:00.0: BAR 6: assigned [mem 0x770000000-0x77001ffff pref]
[ 3.714700] pci 0006:01:00.0: BAR 4: assigned [mem 0x770020000-0x77002ffff 64bit]
[ 3.723385] pci 0006:01:00.0: BAR 0: assigned [mem 0x770030000-0x770033fff 64bit]
[ 3.732010] pci 0006:00:00.0: PCI bridge to [bus 01]
[ 3.737651] pci 0006:00:00.0: bridge window [mem 0x770000000-0x7700fffff]
[ 3.745572] pci 0006:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 3.755206] pci 0006:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 3.764851] iproc-pcie 4801c000.pcie: host bridge /pcie@4801c000 ranges:
[ 3.772474] iproc-pcie 4801c000.pcie: MEM 0x780000000..0x7dfffffff -> 0x780000000
[ 3.781181] iproc-pcie 4801c000.pcie: MEM 0x7e0000000..0x7efffffff -> 0x7d0000000
[ 3.789887] iproc-pcie 4801c000.pcie: MEM 0x7f0000000..0x7ffffffff -> 0x40000000
[ 3.798493] iproc-pcie 4801c000.pcie: reads of config registers that contain 0xffff0001 return incorrect data
[ 3.916104] iproc-pcie 4801c000.pcie: link: UP
[ 3.921160] iproc-pcie 4801c000.pcie: not using iProc MSI
[ 3.927316] iproc-pcie 4801c000.pcie: PCI host bridge to bus 0007:00
[ 3.934540] pci_bus 0007:00: root bus resource [bus 00-ff]
[ 3.940775] pci_bus 0007:00: root bus resource [mem 0x780000000-0x7dfffffff pref]
[ 3.949282] pci_bus 0007:00: root bus resource [mem 0x7e0000000-0x7efffffff pref] (bus address [0x7d0000000-0x7dfffffff])
[ 3.961744] pci_bus 0007:00: root bus resource [mem 0x7f0000000-0x7ffffffff] (bus address [0x40000000-0x4fffffff])
[ 3.974175] pci 0007:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.983923] pci 0007:01:00.0: enabling Extended Tags
[ 3.990749] pci 0007:00:00.0: BAR 14: assigned [mem 0x7f0000000-0x7f00fffff]
[ 3.998764] pci 0007:01:00.0: BAR 6: assigned [mem 0x7f0000000-0x7f001ffff pref]
[ 4.007174] pci 0007:01:00.0: BAR 4: assigned [mem 0x7f0020000-0x7f002ffff 64bit]
[ 4.015859] pci 0007:01:00.0: BAR 0: assigned [mem 0x7f0030000-0x7f0033fff 64bit]
[ 4.024486] pci 0007:00:00.0: PCI bridge to [bus 01]
[ 4.030128] pci 0007:00:00.0: bridge window [mem 0x7f0000000-0x7f00fffff]
[ 4.038049] pci 0007:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 4.047686] pci 0007:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 4.057314] iproc-pcie 60400000.pcie: host bridge /pcie@60400000 ranges:
[ 4.064934] iproc-pcie 60400000.pcie: MEM 0x10000000..0x2fffffff -> 0x10000000
[ 4.073350] iproc-pcie 60400000.pcie: not using iProc MSI
[ 4.079506] iproc-pcie 60400000.pcie: PCI host bridge to bus 0008:00
[ 4.086730] pci_bus 0008:00: root bus resource [bus 00-01]
[ 4.092964] pci_bus 0008:00: root bus resource [mem 0x10000000-0x2fffffff]
[ 4.100850] PCI: OF: /pcie@60400000: Invalid msi-map translation - no match for rid 0x0 on (null)
[ 4.113440] pci 0008:00:00.0: BAR 14: assigned [mem 0x10000000-0x100fffff]
[ 4.121256] pci 0008:00:00.0: BAR 15: assigned [mem 0x10100000-0x103fffff 64bit pref]
[ 4.130160] pci 0008:01:00.0: BAR 2: assigned [mem 0x10100000-0x101fffff 64bit pref]
[ 4.138969] pci 0008:01:00.1: BAR 2: assigned [mem 0x10200000-0x102fffff 64bit pref]
[ 4.147777] pci 0008:01:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[ 4.156093] pci 0008:01:00.1: BAR 0: assigned [mem 0x10010000-0x1001ffff 64bit]
[ 4.164409] pci 0008:01:00.0: BAR 4: assigned [mem 0x10300000-0x10300fff 64bit pref]
[ 4.173219] pci 0008:01:00.1: BAR 4: assigned [mem 0x10301000-0x10301fff 64bit pref]
[ 4.182028] pci 0008:00:00.0: PCI bridge to [bus 01]
[ 4.187670] pci 0008:00:00.0: bridge window [mem 0x10000000-0x100fffff]
[ 4.195388] pci 0008:00:00.0: bridge window [mem 0x10100000-0x103fffff 64bit pref]
[ 4.204198] pci 0008:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 4.213798] pci 0008:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 4.223397] pci 0008:01:00.1: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 4.234243] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.241814] console [ttyS0] disabled
[ 4.245881] 68a10000.uart: ttyS0 at MMIO 0x68a10000 (irq = 117, base_baud = 1562500) is a 16550A
[ 4.255887] console [ttyS0] enabled
[ 4.255887] console [ttyS0] enabled
[ 4.263443] bootconsole [uart8250] disabled
[ 4.263443] bootconsole [uart8250] disabled
[ 4.272605] 68a20000.uart: ttyS2 at MMIO 0x68a20000 (irq = 118, base_baud = 1562500) is a 16550A
[ 4.281800] 68a30000.uart: ttyS3 at MMIO 0x68a30000 (irq = 119, base_baud = 1562500) is a 16550A
[ 4.291179] iproc-rng200 68b20000.hwrng: hwrng registered
[ 4.296959] arm-smmu 64000000.mmu: probing hardware configuration...
[ 4.303536] arm-smmu 64000000.mmu: SMMUv2 with:
[ 4.308225] arm-smmu 64000000.mmu: stage 1 translation
[ 4.313633] arm-smmu 64000000.mmu: stage 2 translation
[ 4.319040] arm-smmu 64000000.mmu: nested translation
[ 4.324358] arm-smmu 64000000.mmu: stream matching with 63 register groups
[ 4.331564] arm-smmu 64000000.mmu: 63 context banks (0 stage-2 only)
[ 4.338231] arm-smmu 64000000.mmu: Supported page sizes: 0x61311000
[ 4.344807] arm-smmu 64000000.mmu: Stage-1: 48-bit VA -> 48-bit IPA
[ 4.351382] arm-smmu 64000000.mmu: Stage-2: 48-bit IPA -> 48-bit PA
[ 4.357958] arm-smmu 64000000.mmu: found only 62 context irq(s) but 63 required
[ 4.367874] loop: module loaded
[ 4.371145] Loading iSCSI transport class v2.0-870.
[ 4.376304] iscsi: registered transport (tcp)
[ 4.380815] mpt3sas version 26.100.00.00 loaded
[ 4.385991] ahci 67d00000.ahci: masking port_map 0x1 -> 0x1
[ 4.391767] ahci 67d00000.ahci: SSS flag set, parallel bus scan disabled
[ 4.408769] ahci 67d00000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.417595] ahci 67d00000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.425606] scsi host0: ahci
[ 4.428688] ata1: SATA max UDMA/133 mmio [mem 0x67d00000-0x67d00fff] port 0x100 irq 101
[ 4.437073] ahci 67d10000.ahci: masking port_map 0x1 -> 0x1
[ 4.442846] ahci 67d10000.ahci: SSS flag set, parallel bus scan disabled
[ 4.459845] ahci 67d10000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.468670] ahci 67d10000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.476594] scsi host1: ahci
[ 4.479640] ata2: SATA max UDMA/133 mmio [mem 0x67d10000-0x67d10fff] port 0x100 irq 102
[ 4.488019] ahci 67d20000.ahci: masking port_map 0x1 -> 0x1
[ 4.493793] ahci 67d20000.ahci: SSS flag set, parallel bus scan disabled
[ 4.510790] ahci 67d20000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.519614] ahci 67d20000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.527582] scsi host2: ahci
[ 4.530632] ata3: SATA max UDMA/133 mmio [mem 0x67d20000-0x67d20fff] port 0x100 irq 103
[ 4.539014] ahci 67d30000.ahci: masking port_map 0x1 -> 0x1
[ 4.544787] ahci 67d30000.ahci: SSS flag set, parallel bus scan disabled
[ 4.561786] ahci 67d30000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.570612] ahci 67d30000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.578546] scsi host3: ahci
[ 4.581598] ata4: SATA max UDMA/133 mmio [mem 0x67d30000-0x67d30fff] port 0x100 irq 104
[ 4.589981] ahci 67e00000.ahci: masking port_map 0x1 -> 0x1
[ 4.595754] ahci 67e00000.ahci: SSS flag set, parallel bus scan disabled
[ 4.612752] ahci 67e00000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.621578] ahci 67e00000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.629536] scsi host4: ahci
[ 4.632582] ata5: SATA max UDMA/133 mmio [mem 0x67e00000-0x67e00fff] port 0x100 irq 105
[ 4.640965] ahci 67e10000.ahci: masking port_map 0x1 -> 0x1
[ 4.646738] ahci 67e10000.ahci: SSS flag set, parallel bus scan disabled
[ 4.663735] ahci 67e10000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.672563] ahci 67e10000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.680494] scsi host5: ahci
[ 4.683546] ata6: SATA max UDMA/133 mmio [mem 0x67e10000-0x67e10fff] port 0x100 irq 106
[ 4.691927] ahci 67e20000.ahci: masking port_map 0x1 -> 0x1
[ 4.697702] ahci 67e20000.ahci: SSS flag set, parallel bus scan disabled
[ 4.714700] ahci 67e20000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.723526] ahci 67e20000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.731510] scsi host6: ahci
[ 4.734561] ata7: SATA max UDMA/133 mmio [mem 0x67e20000-0x67e20fff] port 0x100 irq 107
[ 4.742946] ahci 67e30000.ahci: masking port_map 0x1 -> 0x1
[ 4.748719] ahci 67e30000.ahci: SSS flag set, parallel bus scan disabled
[ 4.750188] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.765717] ahci 67e30000.ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.774541] ahci 67e30000.ahci: flags: 64bit ncq sntf stag clo pmp fbs slum part
[ 4.782482] scsi host7: ahci
[ 4.785531] ata8: SATA max UDMA/133 mmio [mem 0x67e30000-0x67e30fff] port 0x100 irq 108
[ 4.794244] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xc3
[ 4.800823] nand: Micron MT29F8G16ABACAWP
[ 4.804973] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224
[ 4.806190] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.812993] iproc_nand 68c60000.nand: detected 1024MiB total, 256KiB blocks, 4KiB pages, 16B OOB, 16-bit, BCH-8
[ 4.829020] Scanning device for bad blocks
[ 4.849412] random: fast init done
[ 4.858191] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.903451] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.954539] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.005622] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.056699] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.106200] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.606443] random: crng init done
[ 6.694790] libphy: iProc MDIO mux bus: probed
[ 6.699416] libphy: mdio_mux: probed
[ 6.703132] libphy: mdio_mux: probed
[ 6.710918] mdio-mux-iproc 68920000.mdio-mux: iProc mdiomux registered
[ 6.717841] libphy: Fixed MDIO Bus: probed
[ 6.722081] tun: Universal TUN/TAP device driver, 1.6
[ 6.727413] bgmac-enet 68c40000.ethernet: MAC address not present in device tree
[ 6.735080] bgmac-enet 68c40000.ethernet: Invalid MAC addr: 00:00:00:00:00:00
[ 6.742467] bgmac-enet 68c40000.ethernet: Using random MAC: 4a:e0:ae:4c:c9:8c
[ 6.840291] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 6.846330] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.852485] usbcore: registered new interface driver r8152
[ 6.858173] usbcore: registered new interface driver asix
[ 6.863768] usbcore: registered new interface driver ax88179_178a
[ 6.870083] usbcore: registered new interface driver cdc_ether
[ 6.876126] usbcore: registered new interface driver net1080
[ 6.881990] usbcore: registered new interface driver cdc_subset
[ 6.888123] usbcore: registered new interface driver zaurus
[ 6.893902] usbcore: registered new interface driver cdc_ncm
[ 6.899855] VFIO - User Level meta-driver version: 0.3
[ 6.905242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.912003] ehci-pci: EHCI PCI platform driver
[ 6.916613] ehci-platform: EHCI generic platform driver
[ 6.922082] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.928481] ohci-pci: OHCI PCI platform driver
[ 6.933090] ohci-platform: OHCI generic platform driver
[ 6.938726] usbcore: registered new interface driver cdc_acm
[ 6.944584] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6.952878] usbcore: registered new interface driver usb-storage
[ 6.959114] usbcore: registered new interface driver ftdi_sio
[ 6.965068] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 6.972639] usbcore: registered new interface driver pl2303
[ 6.978413] usbserial: USB Serial support registered for pl2303
[ 6.984657] bdc 68502000.usb: Clock not found in Device Tree
[ 6.990523] bdc 68502000.usb: Using 2 phy(s)
[ 6.994945] bdc 68502000.usb: BDC phy specified but not found:-517
[ 7.001353] bdc 68521000.usb: Clock not found in Device Tree
[ 7.007216] bdc 68521000.usb: Using 1 phy(s)
[ 7.011636] bdc 68521000.usb: BDC phy specified but not found:-517
[ 7.018062] i2c /dev entries driver
[ 7.021824] bcm-iproc-i2c 689b0000.i2c: bus set to 100000 Hz
[ 7.027905] bcm-iproc-i2c 689e0000.i2c: bus set to 100000 Hz
[ 7.034093] pcf857x 1-0027: probed
[ 7.037812] sp805-wdt 689c0000.watchdog: registration successful
[ 7.044170] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 7.052999] sdhci: Secure Digital Host Controller Interface driver
[ 7.059396] sdhci: Copyright(c) Pierre Ossman
[ 7.063904] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.069833] EFI Variables Facility v0.08 2004-May-17
[ 7.076933] usbcore: registered new interface driver usbhid
[ 7.082703] usbhid: USB HID core driver
[ 7.086750] NET: Registered protocol family 40
[ 7.091478] arm-ccn 61000000.ccn: No access to interrupts, using timer.
[ 7.098586] GACT probability on
[ 7.101841] Mirror/redirect action on
[ 7.105638] Simple TC action Loaded
[ 7.109257] u32 classifier
[ 7.112057] Performance counters on
[ 7.116025] input device check on
[ 7.119815] Actions configured
[ 7.123373] NET: Registered protocol family 17
[ 7.127998] 9pnet: Installing 9P2000 support
[ 7.132434] Key type dns_resolver registered
[ 7.137059] registered taskstats version 1
[ 7.142414] ssp-pl022 68a80000.spi: ARM PL022 driver, device ID: 0x00241022
[ 7.149643] ssp-pl022 68a80000.spi: mapped registers from 0x0000000068a80000 to 00000000a7707cd6
[ 7.158751] ssp-pl022 68a80000.spi: Failed to work in dma mode, work without dma!
[ 7.166617] ssp-pl022 68a90000.spi: ARM PL022 driver, device ID: 0x00241022
[ 7.173839] ssp-pl022 68a90000.spi: mapped registers from 0x0000000068a90000 to 00000000dfbb328a
[ 7.182952] ssp-pl022 68a90000.spi: Failed to work in dma mode, work without dma!
[ 7.191058] bdc 68502000.usb: Clock not found in Device Tree
[ 7.196926] bdc 68502000.usb: Using 2 phy(s)
[ 7.201348] bdc 68502000.usb: BDC phy specified but not found:-517
[ 7.207772] bdc 68521000.usb: Clock not found in Device Tree
[ 7.213635] bdc 68521000.usb: Using 1 phy(s)
[ 7.218057] bdc 68521000.usb: BDC phy specified but not found:-517
[ 7.224492] pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator
[ 7.231979] pca953x 0-0020: Linked as a consumer to regulator.0
[ 7.240408] pca953x 0-0020: interrupt support not compiled in
[ 7.248748] bdc 68502000.usb: Clock not found in Device Tree
[ 7.254615] bdc 68502000.usb: Using 2 phy(s)
[ 7.259037] bdc 68502000.usb: BDC phy specified but not found:-517
[ 7.265460] bdc 68521000.usb: Clock not found in Device Tree
[ 7.271323] bdc 68521000.usb: Using 1 phy(s)
[ 7.275745] bdc 68521000.usb: BDC phy specified but not found:-517
[ 7.282224] pcieport 0000:00:00.0: ignoring dependency for device, assuming no driver
[ 7.290346] irq: no irq domain found for interrupt-controller !
[ 7.296480] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 7.302824] pcieport 0002:00:00.0: ignoring dependency for device, assuming no driver
[ 7.310934] irq: no irq domain found for interrupt-controller !
[ 7.317064] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[ 7.323395] pcieport 0006:00:00.0: ignoring dependency for device, assuming no driver
[ 7.331504] irq: no irq domain found for interrupt-controller !
[ 7.337633] pcieport 0006:00:00.0: enabling device (0000 -> 0002)
[ 7.343963] pcieport 0007:00:00.0: ignoring dependency for device, assuming no driver
[ 7.352074] irq: no irq domain found for interrupt-controller !
[ 7.358203] pcieport 0007:00:00.0: enabling device (0000 -> 0002)
[ 7.364534] dma-pl330 68c10000.dma: ignoring dependency for device, assuming no driver
[ 7.373565] dma-pl330 68c10000.dma: Loaded driver for PL330 DMAC-241330
[ 7.380413] dma-pl330 68c10000.dma: DBUFF-1024x8bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 7.389182] nvme 0000:01:00.0: ignoring dependency for device, assuming no driver
[ 7.396941] irq: no irq domain found for interrupt-controller !
[ 7.403176] nvme nvme0: pci function 0000:01:00.0
[ 7.408101] nvme 0002:01:00.0: ignoring dependency for device, assuming no driver
[ 7.408103] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.415860] irq: no irq domain found for interrupt-controller !
[ 7.428041] nvme nvme1: pci function 0002:01:00.0
[ 7.432934] nvme 0006:01:00.0: ignoring dependency for device, assuming no driver
[ 7.432963] irq: no irq domain found for interrupt-controller !
[ 7.442326] nvme 0002:01:00.0: enabling device (0000 -> 0002)
[ 7.454547] nvme nvme2: pci function 0006:01:00.0
[ 7.459439] nvme 0007:01:00.0: ignoring dependency for device, assuming no driver
[ 7.467215] nvme 0006:01:00.0: enabling device (0000 -> 0002)
[ 7.467228] irq: no irq domain found for interrupt-controller !
[ 7.479438] nvme nvme3: pci function 0007:01:00.0
[ 7.486106] nvme 0007:01:00.0: enabling device (0000 -> 0002)
[ 7.496014] bdc 68502000.usb: Clock not found in Device Tree
[ 7.501878] bdc 68502000.usb: Using 2 phy(s)
[ 7.506299] bdc 68502000.usb: BDC phy specified but not found:-517
[ 7.512721] bdc 68521000.usb: Clock not found in Device Tree
[ 7.518584] bdc 68521000.usb: Using 1 phy(s)
[ 7.523004] bdc 68521000.usb: BDC phy specified but not found:-517
[ 7.529426] sdhci-iproc 68cf1000.sdhci: ignoring dependency for device, assuming no driver
[ 7.538034] sdhci-iproc 68cf1000.sdhci: Linked as a consumer to regulator.1
[ 7.576228] mmc0: SDHCI controller on 68cf1000.sdhci [68cf1000.sdhci] using ADMA
[ 7.583915] sdhci-iproc 68cf2000.sdhci: ignoring dependency for device, assuming no driver
[ 7.592507] sdhci-iproc 68cf2000.sdhci: Linked as a consumer to regulator.2
[ 7.628972] mmc1: SDHCI controller on 68cf2000.sdhci [68cf2000.sdhci] using ADMA
[ 7.636732] bdc 68502000.usb: Clock not found in Device Tree
[ 7.642646] bdc 68502000.usb: Using 2 phy(s)
[ 7.647075] bdc 68502000.usb: BDC phy specified but not found:-517
[ 7.653500] bdc 68521000.usb: Clock not found in Device Tree
[ 7.659391] bdc 68521000.usb: Using 1 phy(s)
[ 7.663816] bdc 68521000.usb: BDC phy specified but not found:-517
[ 7.670297] hctosys: unable to open rtc device (rtc0)
[ 7.701303] mmc0: new DDR MMC card at address 0001
[ 7.706538] mmcblk0: mmc0:0001 MMC16G 14.6 GiB
[ 7.711452] mmcblk0boot0: mmc0:0001 MMC16G partition 1 4.00 MiB
[ 7.717805] mmcblk0boot1: mmc0:0001 MMC16G partition 2 4.00 MiB
[ 7.723971] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (243:0)
[ 7.739931] mmcblk0: p1 p2 p3 p4 p5
[ 7.744452] bdc 68502000.usb: Clock not found in Device Tree
[ 7.750316] bdc 68502000.usb: Using 2 phy(s)
[ 7.754736] bdc 68502000.usb: BDC phy specified but not found:-517
[ 7.761159] bdc 68521000.usb: Clock not found in Device Tree
[ 7.767021] bdc 68521000.usb: Using 1 phy(s)
[ 7.771441] bdc 68521000.usb: BDC phy specified but not found:-517
[ 9.766120] bgmac-enet 68c40000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 9.792078] IP-Config: Complete:
[ 9.795418] device=eth0, hwaddr=4a:e0:ae:4c:c9:8c, ipaddr=10.136.13.31, mask=255.255.255.0, gw=10.136.13.1
[ 9.805860] host=10.136.13.31, domain=, nis-domain=(none)
[ 9.811897] bootserver=10.136.4.151, rootserver=10.136.4.151, rootpath=
[ 9.819431] ttyS0 - failed to request DMA
[ 9.988769] pci_generic_config_write32: 209 callbacks suppressed
[ 9.988772] pci_bus 0007:01: 2-byte config write to 0007:01:00.0 offset 0xe2 may corrupt adjacent RW1C bits
[ 10.005323] pci_bus 0006:01: 2-byte config write to 0006:01:00.0 offset 0xe2 may corrupt adjacent RW1C bits
[ 10.015601] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0xe2 may corrupt adjacent RW1C bits
[ 10.025883] pci_bus 0002:01: 2-byte config write to 0002:01:00.0 offset 0xe2 may corrupt adjacent RW1C bits
[ 10.036162] pci_bus 0007:01: 2-byte config write to 0007:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 10.046271] pci_bus 0006:01: 2-byte config write to 0006:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 10.056302] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 10.066329] pci_bus 0002:01: 2-byte config write to 0002:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 10.076375] pci_bus 0007:01: 2-byte config write to 0007:01:00.0 offset 0xe2 may corrupt adjacent RW1C bits
[ 10.086491] pci_bus 0006:01: 2-byte config write to 0006:01:00.0 offset 0xe2 may corrupt adjacent RW1C bits
[ 10.109315] md: Waiting for all devices to be available before autodetect
[ 10.116349] md: If you don't use raid, use raid=noautodetect
[ 10.122344] md: Autodetecting RAID arrays.
[ 10.126586] md: autorun ...
[ 10.129478] md: ... autorun DONE.
[ 10.159365] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[ 10.167749] VFS: Mounted root (ext4 filesystem) on device 179:4.
[ 10.184778] devtmpfs: mounted
[ 10.188066] Freeing unused kernel memory: 768K
[ 10.208134] Run /sbin/init as init process
[ 10.437661] systemd[1]: System time before build time, advancing clock.
[ 10.481437] systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 10.503591] systemd[1]: Detected architecture arm64.
\
 
 \ /
  Last update: 2019-11-14 02:29    [W:0.105 / U:1.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site