lkml.org 
[lkml]   [2019]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64
On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
<katsuhiro@katsuster.net> wrote:
>
> This patch adds audio codec (Everest ES8316) and I2S audio nodes for
> RK3399 RockPro64.

Hi Katsuhiro,

I tested your patch with my rockpro64 on 5.4-rc6 which has your other
patches to es8316 driver, but apparently it doesn't work.

'alsamixer' complains 'cannot load mixer controls: No such device or
address' and if I try to play audio with mpg123 it pretends that it
plays something but there's no sound.

Any idea what can be wrong?

Regards,
Vasily

> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
> ---
> .../boot/dts/rockchip/rk3399-rockpro64.dts | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> index 0401d4ec1f45..8b1e6382b140 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> @@ -81,6 +81,12 @@
> reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> };
>
> + sound {
> + compatible = "audio-graph-card";
> + label = "rockchip,rk3399";
> + dais = <&i2s1_p0>;
> + };
> +
> vcc12v_dcin: vcc12v-dcin {
> compatible = "regulator-fixed";
> regulator-name = "vcc12v_dcin";
> @@ -470,6 +476,20 @@
> i2c-scl-rising-time-ns = <300>;
> i2c-scl-falling-time-ns = <15>;
> status = "okay";
> +
> + es8316: codec@11 {
> + compatible = "everest,es8316";
> + reg = <0x11>;
> + clocks = <&cru SCLK_I2S_8CH_OUT>;
> + clock-names = "mclk";
> + #sound-dai-cells = <0>;
> +
> + port {
> + es8316_p0_0: endpoint {
> + remote-endpoint = <&i2s1_p0_0>;
> + };
> + };
> + };
> };
>
> &i2c3 {
> @@ -505,6 +525,14 @@
> rockchip,playback-channels = <2>;
> rockchip,capture-channels = <2>;
> status = "okay";
> +
> + i2s1_p0: port {
> + i2s1_p0_0: endpoint {
> + dai-format = "i2s";
> + mclk-fs = <256>;
> + remote-endpoint = <&es8316_p0_0>;
> + };
> + };
> };
>
> &i2s2 {
> --
> 2.23.0.rc1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2019-11-11 01:18    [W:0.091 / U:39.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site