lkml.org 
[lkml]   [2019]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] PCI: PM: Move to D0 before calling pci_legacy_resume_early()
From
Date
On 10/7/2019 8:57 PM, Dexuan Cui wrote:
>> -----Original Message-----
>> From: Bjorn Helgaas <helgaas@kernel.org>
>> Sent: Monday, October 7, 2019 6:24 AM
>> To: Dexuan Cui <decui@microsoft.com>
>> Cc: lorenzo.pieralisi@arm.com; linux-pci@vger.kernel.org; Michael Kelley
>> <mikelley@microsoft.com>; linux-hyperv@vger.kernel.org;
>> linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org; Sasha
>> Levin <Alexander.Levin@microsoft.com>; Haiyang Zhang
>> <haiyangz@microsoft.com>; KY Srinivasan <kys@microsoft.com>;
>> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com; vkuznets
>> <vkuznets@redhat.com>; marcelo.cerri@canonical.com; Stephen Hemminger
>> <sthemmin@microsoft.com>; jackm@mellanox.com
>> Subject: Re: [PATCH v2] PCI: PM: Move to D0 before calling
>> pci_legacy_resume_early()
>>
>> On Wed, Aug 14, 2019 at 01:06:55AM +0000, Dexuan Cui wrote:
>>> In pci_legacy_suspend_late(), the device state is moved to PCI_UNKNOWN.
>>>
>>> In pci_pm_thaw_noirq(), the state is supposed to be moved back to PCI_D0,
>>> but the current code misses the pci_legacy_resume_early() path, so the
>>> state remains in PCI_UNKNOWN in that path. As a result, in the resume
>>> phase of hibernation, this causes an error for the Mellanox VF driver,
>>> which fails to enable MSI-X because pci_msi_supported() is false due
>>> to dev->current_state != PCI_D0:
>>>
>>> mlx4_core a6d1:00:02.0: Detected virtual function - running in slave mode
>>> mlx4_core a6d1:00:02.0: Sending reset
>>> mlx4_core a6d1:00:02.0: Sending vhcr0
>>> mlx4_core a6d1:00:02.0: HCA minimum page size:512
>>> mlx4_core a6d1:00:02.0: Timestamping is not supported in slave mode
>>> mlx4_core a6d1:00:02.0: INTx is not supported in multi-function mode,
>> aborting
>>> PM: dpm_run_callback(): pci_pm_thaw+0x0/0xd7 returns -95
>>> PM: Device a6d1:00:02.0 failed to thaw: error -95
>>>
>>> To be more accurate, the "resume" phase means the "thaw" callbacks which
>>> run before the system enters hibernation: when the user runs the command
>>> "echo disk > /sys/power/state" for hibernation, first the kernel "freezes"
>>> all the devices and creates a hibernation image, then the kernel "thaws"
>>> the devices including the disk/NIC, writes the memory to the disk, and
>>> powers down. This patch fixes the error message for the Mellanox VF driver
>>> in this phase.
>>>
>>> When the system starts again, a fresh kernel starts to run, and when the
>>> kernel detects that a hibernation image was saved, the kernel "quiesces"
>>> the devices, and then "restores" the devices from the saved image. In this
>>> path:
>>> device_resume_noirq() -> ... ->
>>> pci_pm_restore_noirq() ->
>>> pci_pm_default_resume_early() ->
>>> pci_power_up() moves the device states back to PCI_D0. This path is
>>> not broken and doesn't need my patch.
>>>
>>> Signed-off-by: Dexuan Cui <decui@microsoft.com>
>> This looks like a bugfix for 5839ee7389e8 ("PCI / PM: Force devices to
>> D0 in pci_pm_thaw_noirq()") so maybe it should be marked for stable as
>> 5839ee7389e8 was?
>>
>> Rafael, could you confirm?

No, it is not a bug fix for that commit.  The underlying issue would be
there without that commit too.


>>> ---
>>>
>>> changes in v2:
>>> Updated the changelog with more details.
>>>
>>> drivers/pci/pci-driver.c | 7 ++++---
>>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
>>> index 36dbe960306b..27dfc68db9e7 100644
>>> --- a/drivers/pci/pci-driver.c
>>> +++ b/drivers/pci/pci-driver.c
>>> @@ -1074,15 +1074,16 @@ static int pci_pm_thaw_noirq(struct device
>> *dev)
>>> return error;
>>> }
>>>
>>> - if (pci_has_legacy_pm_support(pci_dev))
>>> - return pci_legacy_resume_early(dev);
>>> -
>>> /*
>>> * pci_restore_state() requires the device to be in D0 (because of MSI
>>> * restoration among other things), so force it into D0 in case the
>>> * driver's "freeze" callbacks put it into a low-power state directly.
>>> */
>>> pci_set_power_state(pci_dev, PCI_D0);
>>> +
>>> + if (pci_has_legacy_pm_support(pci_dev))
>>> + return pci_legacy_resume_early(dev);
>>> +
>>> pci_restore_state(pci_dev);
>>>
>>> if (drv && drv->pm && drv->pm->thaw_noirq)
>>> --
>>> 2.19.1
>>>
The patch looks reasonable to me, but the comment above the
pci_set_power_state() call needs to be updated too IMO.


\
 
 \ /
  Last update: 2019-10-08 19:33    [W:0.147 / U:5.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site