lkml.org 
[lkml]   [2019]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC
On Fri, 4 Oct 2019 at 17:00, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Sync with exynos_defconfig and enable following options for Samsung
> Exynos SoC based boards:
> 1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller,
> used for example on Exynos5433 (if booted in 32-bit mode),
> 2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs,
> 3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on
> Exynos5260 RexNos REX-RED board,
> 4. SND_SOC_ARNDALE: sound support on Arndale boards,
> 5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,,
> 6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers
> for handling micro USB on mobile Samsung boards (Trats, Trats2,
> Rinato),
> 7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and
> SMDK5250 boards.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> SND_SOC_ARNDALE is in progress (not yet applied)
> ---
> arch/arm/configs/multi_v7_defconfig | 18 ++++++++++++++++--
> 1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index 198de8e36d92..7f7978dba8ab 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -168,6 +168,14 @@ CONFIG_MAC80211=m
> CONFIG_RFKILL=y
> CONFIG_RFKILL_INPUT=y
> CONFIG_RFKILL_GPIO=y
> +CONFIG_NFC=m
> +CONFIG_NFC_DIGITAL=m
> +CONFIG_NFC_NCI=m
> +CONFIG_NFC_NCI_SPI=m
> +CONFIG_NFC_NCI_UART=m
> +CONFIG_NFC_HCI=m
> +CONFIG_NFC_SHDLC=y
> +CONFIG_NFC_S3FWRN5_I2C=m
> CONFIG_PCIEPORTBUS=y
> CONFIG_PCI_MVEBU=y
> CONFIG_PCI_TEGRA=y
> @@ -491,12 +499,12 @@ CONFIG_BCM2835_THERMAL=m
> CONFIG_BRCMSTB_THERMAL=m
> CONFIG_ST_THERMAL_MEMMAP=y
> CONFIG_UNIPHIER_THERMAL=y
> -CONFIG_WATCHDOG=y
> CONFIG_DA9063_WATCHDOG=m
> CONFIG_XILINX_WATCHDOG=y
> CONFIG_ARM_SP805_WATCHDOG=y
> CONFIG_AT91SAM9X_WATCHDOG=y
> CONFIG_SAMA5D4_WATCHDOG=y
> +CONFIG_S3C2410_WATCHDOG=m
> CONFIG_DW_WATCHDOG=y
> CONFIG_DAVINCI_WATCHDOG=m
> CONFIG_ORION_WATCHDOG=y
> @@ -581,6 +589,7 @@ CONFIG_REGULATOR_QCOM_RPM=y
> CONFIG_REGULATOR_QCOM_SMD_RPM=m
> CONFIG_REGULATOR_RK808=y
> CONFIG_REGULATOR_RN5T618=y
> +CONFIG_REGULATOR_S2MPA01=m
> CONFIG_REGULATOR_S2MPS11=y
> CONFIG_REGULATOR_S5M8767=y
> CONFIG_REGULATOR_STM32_BOOSTER=m
> @@ -711,6 +720,7 @@ CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
> CONFIG_SND_SOC_SMDK_WM8994_PCM=m
> CONFIG_SND_SOC_SNOW=m
> CONFIG_SND_SOC_ODROID=m
> +CONFIG_SND_SOC_ARNDALE=m
> CONFIG_SND_SOC_SH4_FSI=m
> CONFIG_SND_SOC_RCAR=m
> CONFIG_SND_SOC_STI=m
> @@ -933,7 +943,7 @@ CONFIG_BCM2835_MBOX=y
> CONFIG_ROCKCHIP_IOMMU=y
> CONFIG_TEGRA_IOMMU_GART=y
> CONFIG_TEGRA_IOMMU_SMMU=y
> -CONFIG_REMOTEPROC=y

This appeared here by mistake. It's wrong.

I'll send v2.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2019-10-07 09:06    [W:0.054 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site