lkml.org 
[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] net: phylink: switch to using fwnode_gpiod_get_index()
Date
Instead of fwnode_get_named_gpiod() that I plan to hide away, let's use
the new fwnode_gpiod_get_index() that mimics gpiod_get_index(), but
works with arbitrary firmware node.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

drivers/net/phy/phylink.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index a5a57ca94c1a..c34ca644d47e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -168,8 +168,8 @@ static int phylink_parse_fixedlink(struct phylink *pl,
pl->link_config.pause |= MLO_PAUSE_ASYM;

if (ret == 0) {
- desc = fwnode_get_named_gpiod(fixed_node, "link-gpios",
- 0, GPIOD_IN, "?");
+ desc = fwnode_gpiod_get_index(fixed_node, "link", 0,
+ GPIOD_IN, "?");

if (!IS_ERR(desc))
pl->link_gpio = desc;
--
2.23.0.581.g78d2f28ef7-goog
\
 
 \ /
  Last update: 2019-10-05 01:15    [W:0.084 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site