lkml.org 
[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mtd: onenand: prevent memory leak in onenand_scan
Thanks Miquel for pointing that out. v2 was sent.

Thank you,
Navid.

On Fri, Oct 4, 2019 at 10:57 AM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>
> Hi Navid,
>
> Navid Emamdoost <navid.emamdoost@gmail.com> wrote on Mon, 30 Sep 2019
> 16:37:17 -0500:
>
> > Would you please take a look at this patch?
> >
> > On Wed, Sep 25, 2019 at 10:43 AM Navid Emamdoost
> > <navid.emamdoost@gmail.com> wrote:
> > >
> > > In onenand_scan if scan_bbt fails the allocated buffers should be
> > > released.
> > >
> > > Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
> > > ---
> > > drivers/mtd/nand/onenand/onenand_base.c | 5 ++++-
> > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
> > > index 77bd32a683e1..79c01f42925a 100644
> > > --- a/drivers/mtd/nand/onenand/onenand_base.c
> > > +++ b/drivers/mtd/nand/onenand/onenand_base.c
> > > @@ -3977,8 +3977,11 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
> > > this->badblockpos = ONENAND_BADBLOCK_POS;
> > >
> > > ret = this->scan_bbt(mtd);
> > > - if ((!FLEXONENAND(this)) || ret)
> > > + if ((!FLEXONENAND(this)) || ret) {
> > > + kfree(this->page_buf);
>
> Apparently you missed:
>
> #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
> kfree(this->verify_buf);
> #endif
>
> > > + kfree(this->oob_buf);
> > > return ret;
> > > + }
> > >
> > > /* Change Flex-OneNAND boundaries if required */
> > > for (i = 0; i < MAX_DIES; i++)
> > > --
> > > 2.17.1
> > >
> >
> >
>
> Thanks,
> Miquèl



--
Navid.

\
 
 \ /
  Last update: 2019-10-04 19:20    [W:0.092 / U:3.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site