lkml.org 
[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 00/14] dmaengine/soc: Add Texas Instruments UDMA support
From
Date
On 9/30/19 11:16 PM, Peter Ujfalusi wrote:
> Hi,
>
> Changes since v2
> )https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*)
> - Based on 5.4-rc1
> - Support for Flow only data transfer for the glue layer
>

>
> Grygorii Strashko (3):
> bindings: soc: ti: add documentation for k3 ringacc
> soc: ti: k3: add navss ringacc driver
> dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
>
> Peter Ujfalusi (11):
> dmaengine: doc: Add sections for per descriptor metadata support
> dmaengine: Add metadata_ops for dma_async_tx_descriptor
> dmaengine: Add support for reporting DMA cached data amount
> dmaengine: ti: Add cppi5 header for UDMA
> dt-bindings: dma: ti: Add document for K3 UDMA
> dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io
> func
> dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate
> and filter_fn
> dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free
> chan_resources
> dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks
> 1
> dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks
> 2
> dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile
>
> .../devicetree/bindings/dma/ti/k3-udma.txt | 185 +
> .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 +
> Documentation/driver-api/dmaengine/client.rst | 75 +
> .../driver-api/dmaengine/provider.rst | 46 +
> drivers/dma/dmaengine.c | 73 +
> drivers/dma/dmaengine.h | 8 +
> drivers/dma/ti/Kconfig | 22 +
> drivers/dma/ti/Makefile | 2 +
> drivers/dma/ti/k3-udma-glue.c | 1225 ++++++
> drivers/dma/ti/k3-udma-private.c | 141 +
> drivers/dma/ti/k3-udma.c | 3525 +++++++++++++++++
> drivers/dma/ti/k3-udma.h | 161 +
> drivers/soc/ti/Kconfig | 12 +
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/k3-ringacc.c | 1165 ++++++
> include/dt-bindings/dma/k3-udma.h | 10 +
> include/linux/dma/k3-udma-glue.h | 134 +
> include/linux/dma/ti-cppi5.h | 1049 +++++
> include/linux/dmaengine.h | 110 +
> include/linux/soc/ti/k3-ringacc.h | 245 ++
> 20 files changed, 8248 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.txt
> create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
> create mode 100644 drivers/dma/ti/k3-udma-glue.c
> create mode 100644 drivers/dma/ti/k3-udma-private.c
> create mode 100644 drivers/dma/ti/k3-udma.c
> create mode 100644 drivers/dma/ti/k3-udma.h
> create mode 100644 drivers/soc/ti/k3-ringacc.c
> create mode 100644 include/dt-bindings/dma/k3-udma.h
> create mode 100644 include/linux/dma/k3-udma-glue.h
> create mode 100644 include/linux/dma/ti-cppi5.h
> create mode 100644 include/linux/soc/ti/k3-ringacc.h
>
Can you please split this series and post drivers/soc/* bits
separately ? If its ready, I can apply k3-ringacc.c changes.

Regards,
Santosh

\
 
 \ /
  Last update: 2019-10-04 18:40    [W:0.272 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site