lkml.org 
[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/7] add Tegra194 XUSB host and pad controller support
Date
Hi,

This series introduces support for Tegra194 XUSB host and pad
controller. Tegra194 XUSB host and pad controller are highly
similar to the controllers found on Tegra186. Therefore, it's
possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.

Changelog:
v3:
add change log to cover latter

v2:
xhci: tegra: Parameterize mailbox register addresses
- no change

usb: host: xhci-tegra: Add Tegra194 XHCI support
- no change

phy: tegra: xusb: Protect Tegra186 soc with config
- new patch to protect Tegra186 soc data with config

phy: tegra: xusb: Add Tegra194 support
- removed unnecessary #if/#endif pairs
- introduce new soc->supports_gen2 flag which indicate whether or not
a soc supports USB 3.1 Gen 2 speed

dt-bindings: phy: tegra: Add Tegra194 support
- fix a typo

arm64: tegra: Add XUSB and pad controller on Tegra194
- renamed xhci@3610000 with usb@3610000
- moved padctl@3520000 and usb@3610000 inside /cbb
- cleaned up "clocks" property of usb@3610000 node
- added blanks lines to visually separate blocks

arm64: tegra: Enable XUSB host in P2972-0000 board
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator

JC Kuo (7):
xhci: tegra: Parameterize mailbox register addresses
usb: host: xhci-tegra: Add Tegra194 XHCI support
phy: tegra: xusb: Protect Tegra186 soc with config
phy: tegra: xusb: Add Tegra194 support
dt-bindings: phy: tegra: Add Tegra194 support
arm64: tegra: Add XUSB and pad controller on Tegra194
arm64: tegra: Enable XUSB host in P2972-0000 board

.../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++
drivers/phy/tegra/Makefile | 1 +
drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++-----
drivers/phy/tegra/xusb.c | 7 +
drivers/phy/tegra/xusb.h | 6 +
drivers/usb/host/xhci-tegra.c | 88 +++++++++--
9 files changed, 448 insertions(+), 51 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2019-10-04 18:30    [W:0.151 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site