lkml.org 
[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] mfd: madera: Add support for requesting the supply clocks
Date
Add the ability to get the clock for each clock input pin of the chip
and enable MCLK2 since that is expected to be a permanently enabled
32kHz clock.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

Changes since v4:
- Change (ret != 0) to (!ret)

drivers/mfd/madera-core.c | 27 ++++++++++++++++++++++++++-
include/linux/mfd/madera/core.h | 11 +++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
index 29540cbf75934..a8cfadc1fc01e 100644
--- a/drivers/mfd/madera-core.c
+++ b/drivers/mfd/madera-core.c
@@ -450,6 +450,21 @@ int madera_dev_init(struct madera *madera)
sizeof(madera->pdata));
}

+ madera->mclk[MADERA_MCLK1].id = "mclk1";
+ madera->mclk[MADERA_MCLK2].id = "mclk2";
+ madera->mclk[MADERA_MCLK3].id = "mclk3";
+
+ ret = devm_clk_bulk_get_optional(madera->dev, ARRAY_SIZE(madera->mclk),
+ madera->mclk);
+ if (ret) {
+ dev_err(madera->dev, "Failed to get clocks: %d\n", ret);
+ return ret;
+ }
+
+ /* Not using devm_clk_get to prevent breakage of existing DTs */
+ if (!madera->mclk[MADERA_MCLK2].clk)
+ dev_warn(madera->dev, "Missing MCLK2, requires 32kHz clock\n");
+
ret = madera_get_reset_gpio(madera);
if (ret)
return ret;
@@ -660,13 +675,19 @@ int madera_dev_init(struct madera *madera)
}

/* Init 32k clock sourced from MCLK2 */
+ ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2].clk);
+ if (ret) {
+ dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret);
+ goto err_reset;
+ }
+
ret = regmap_update_bits(madera->regmap,
MADERA_CLOCK_32K_1,
MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
if (ret) {
dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
- goto err_reset;
+ goto err_clock;
}

pm_runtime_set_active(madera->dev);
@@ -687,6 +708,8 @@ int madera_dev_init(struct madera *madera)

err_pm_runtime:
pm_runtime_disable(madera->dev);
+err_clock:
+ clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
err_reset:
madera_enable_hard_reset(madera);
regulator_disable(madera->dcvdd);
@@ -713,6 +736,8 @@ int madera_dev_exit(struct madera *madera)
*/
pm_runtime_disable(madera->dev);

+ clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
+
regulator_disable(madera->dcvdd);
regulator_put(madera->dcvdd);

diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
index 7ffa696cce7ca..ad2c138105d4b 100644
--- a/include/linux/mfd/madera/core.h
+++ b/include/linux/mfd/madera/core.h
@@ -8,6 +8,7 @@
#ifndef MADERA_CORE_H
#define MADERA_CORE_H

+#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/mfd/madera/pdata.h>
@@ -29,6 +30,13 @@ enum madera_type {
CS42L92 = 9,
};

+enum {
+ MADERA_MCLK1,
+ MADERA_MCLK2,
+ MADERA_MCLK3,
+ MADERA_NUM_MCLK
+};
+
#define MADERA_MAX_CORE_SUPPLIES 2
#define MADERA_MAX_GPIOS 40

@@ -155,6 +163,7 @@ struct snd_soc_dapm_context;
* @irq_dev: the irqchip child driver device
* @irq_data: pointer to irqchip data for the child irqchip driver
* @irq: host irq number from SPI or I2C configuration
+ * @mclk: Structure holding clock supplies
* @out_clamp: indicates output clamp state for each analogue output
* @out_shorted: indicates short circuit state for each analogue output
* @hp_ena: bitflags of enable state for the headphone outputs
@@ -184,6 +193,8 @@ struct madera {
struct regmap_irq_chip_data *irq_data;
int irq;

+ struct clk_bulk_data mclk[MADERA_NUM_MCLK];
+
unsigned int num_micbias;
unsigned int num_childbias[MADERA_MAX_MICBIAS];

--
2.11.0
\
 
 \ /
  Last update: 2019-10-04 17:39    [W:0.055 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site