lkml.org 
[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 board
Date
Hi Alex,

ok, i'll push only the dt patch link to the last version of driver
touchscreen on display board MB1407.

BR

Yannick Fertré


On 10/3/19 12:34 PM, Alexandre Torgue wrote:
> Hi Yannick
>
> On 9/30/19 4:45 PM, Yannick Fertré wrote:
>> Enable focaltech ft6236 touchscreen on STM32MP157C-DK2 board.
>> This device supports 2 different addresses (0x2a and 0x38)
>> depending on the display  board version (MB1407).
>>
>> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
>> ---
>>   arch/arm/boot/dts/stm32mp157c-dk2.dts | 23 +++++++++++++++++++++++
>>   1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts
>> b/arch/arm/boot/dts/stm32mp157c-dk2.dts
>> index 20ea601..527bb75 100644
>> --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
>> +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
>> @@ -61,6 +61,29 @@
>>       };
>>   };
>>   +&i2c1 {
>> +    touchscreen@2a {
>> +        compatible = "focaltech,ft6236";
>> +        reg = <0x2a>;
>> +        interrupts = <2 2>;
>> +        interrupt-parent = <&gpiof>;
>> +        interrupt-controller;
>> +        touchscreen-size-x = <480>;
>> +        touchscreen-size-y = <800>;
>> +        status = "okay";
>> +    };
>> +    touchscreen@38 {
>> +        compatible = "focaltech,ft6236";
>> +        reg = <0x38>;
>> +        interrupts = <2 2>;
>> +        interrupt-parent = <&gpiof>;
>> +        interrupt-controller;
>> +        touchscreen-size-x = <480>;
>> +        touchscreen-size-y = <800>;
>> +        status = "okay";
>> +    };
>> +};
>
> I'm not confident by this duplication. We should only support the
> latest revision of the MB1407. I understand the need but my fear is to
> duplicate this node each time we have a new revision (and imagine if
> we do that for all i2c devices).
>
> regards
> alex
>
>
>>   &ltdc {
>>       status = "okay";
\
 
 \ /
  Last update: 2019-10-04 15:21    [W:0.069 / U:3.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site