[lkml]   [2019]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH] r8152: Set macpassthru in reset_resume callback
r8152 may fail to establish network connection after resume from system

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during

Signed-off-by: Kai-Heng Feng <>
drivers/net/usb/r8152.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 08726090570e..cee9fef925cd 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4799,10 +4799,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
struct r8152 *tp = usb_get_intfdata(intf);

clear_bit(SELECTIVE_SUSPEND, &tp->flags);
- mutex_lock(&tp->control);
queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
- mutex_unlock(&tp->control);
+ set_ethernet_addr(tp);
return rtl8152_resume(intf);

 \ /
  Last update: 2019-10-04 14:53    [W:0.092 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site