[lkml]   [2019]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 5.3 215/344] mmc: dw_mmc: Re-store SDIO IRQs mask at system resume
From: Ulf Hansson <>

[ Upstream commit 7c526608d5afb62cbc967225e2ccaacfdd142e9d ]

In cases when SDIO IRQs have been enabled, runtime suspend is prevented by
the driver. However, this still means dw_mci_runtime_suspend|resume() gets
called during system suspend/resume, via pm_runtime_force_suspend|resume().
This means during system suspend/resume, the register context of the dw_mmc
device most likely loses its register context, even in cases when SDIO IRQs
have been enabled.

To re-enable the SDIO IRQs during system resume, the dw_mmc driver
currently relies on the mmc core to re-enable the SDIO IRQs when it resumes
the SDIO card, but this isn't the recommended solution. Instead, it's
better to deal with this locally in the dw_mmc driver, so let's do that.

Tested-by: Matthias Kaehlcke <>
Signed-off-by: Ulf Hansson <>
Reviewed-by: Douglas Anderson <>
Signed-off-by: Ulf Hansson <>
Signed-off-by: Sasha Levin <>
drivers/mmc/host/dw_mmc.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index eea52e2c5a0ce..79c55c7b4afd9 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -3460,6 +3460,10 @@ int dw_mci_runtime_resume(struct device *dev)
/* Force setup bus to guarantee available clock output */
dw_mci_setup_bus(host->slot, true);

+ /* Re-enable SDIO interrupts. */
+ if (sdio_irq_claimed(host->slot->mmc))
+ __dw_mci_enable_sdio_irq(host->slot, 1);
/* Now that slots are all setup, we can enable card detect */


 \ /
  Last update: 2019-10-03 18:59    [W:0.810 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site